LOL is that chair hilarious or what? Theyre on every peak ive climbed hereBeautiful pics Sloth!! Did you carry the adirondack chair with you?
BF Mods by Custom-Classic
- Thread starter custom-classic
- Start date
- th_trl_thread_readers 0
- Status
I keep posting pics with the white balance off. When i have a finish that can stand up to the scrutiny of the worlds second sharpest camera ill take her on a real photo shoot.
Until then heres the right color balance and a photo made rather than taken without a stupid filter.
Boy I miss my photography work. I should find s photography thread.
Unfortunately i jacked up my nails on sandpaper so their haggard stumpiness ruins this one too :/
And I'm afraid she needs another proper refinish as mine aren't deep enough to hold properly.
Corey are you too tired of this stiff to do it for me ? I know what goes into it and what you charge and i feel guilty sending in based on what you've just stated.
Maybe i should buy a variapeed dremel and find some tutorials. Does the aluminum respond differently than stainless in some way when using power tools?
Also. Screw it. Incoming order to be filled at your leisure. Im tired if crap bottom feed mods.
All these puppies are making me sad. But they're all so beautiful. I think my ex is about to cave in and give me visitation back. Fingers crossed. Not fair to cut one party off from a coupled pet parenting just because you can and wish to punish
I miss nap time. Unflattering pics and all
This is what 6'5"+ papa looks like with 10" tall baby
Until then heres the right color balance and a photo made rather than taken without a stupid filter.
Boy I miss my photography work. I should find s photography thread.
Unfortunately i jacked up my nails on sandpaper so their haggard stumpiness ruins this one too :/
And I'm afraid she needs another proper refinish as mine aren't deep enough to hold properly.
Corey are you too tired of this stiff to do it for me ? I know what goes into it and what you charge and i feel guilty sending in based on what you've just stated.
Maybe i should buy a variapeed dremel and find some tutorials. Does the aluminum respond differently than stainless in some way when using power tools?
Also. Screw it. Incoming order to be filled at your leisure. Im tired if crap bottom feed mods.
All these puppies are making me sad. But they're all so beautiful. I think my ex is about to cave in and give me visitation back. Fingers crossed. Not fair to cut one party off from a coupled pet parenting just because you can and wish to punish
I miss nap time. Unflattering pics and all
This is what 6'5"+ papa looks like with 10" tall baby
Last edited:
Here's a little tip for you. Lay your Scothbrite pad in a shoe box or something with apropiate straight sides on a flat surface. Use the side of the box as your guide and pull and push the mod back and forth evenly rotating the mod as you go.. The end result will be that you will have nice and straight lines in the finish. 
My aluminum got a new hat 
My vape style has evolved to a more restricted lung hit (although not too restricted), the Hadaly is hitting my sweet spot.
My vape style has evolved to a more restricted lung hit (although not too restricted), the Hadaly is hitting my sweet spot.
Mine got a new green hat feather
We were on our way back so its actually extending vacation by a day or 2...luckily our jobs are ok with it, and we are in a cool town. Gonna take 2 days to get car fixed. But not overly expensive, surprisingly (transmission problems...)
Ya, i aint complaining. Except it sucks having to fix the car because im planning on a new one in the spring. But the American dollar is strong to the Canadian right now, so i come out way ahead in this deal
welp...I recon you picked a good place to break down then !
My aluminum got a new hat
View attachment 609689
My vape style has evolved to a more restricted lung hit (although not too restricted), the Hadaly is hitting my sweet spot.
I just received my go dripper. I bought the flavor cap to. Its outstanding. The air flow reducers work perfectly. Im sorry for the gentleman who sold his before receiving the afr as they make a perfect mtl vape. .
I received the short and long drip tip and the mark bugs charm metal tip fits in with a slightly thicker o ring. The long drip tip
Is long but really does enhance flavor. The short one works well and even looks decent in the black cap.
I have been using it with cheap regulated tc boxes as the no toy is so small
And looks good on the cc
I personally think the gp dripper is the most flavorful atomizer i have for bottom feed. Even for dual coil builds mtl works with a small
Drip Tip. If anyone can't find a good setup for mtl I j that dripper post up. Ive gone through about twenty builds already finding the golden build
Even passed the chalice form flavor. With afr 2mm id 6 wrap spaced 316l seems like a low resistance build but its perfect for mtl . Try it if you some 316 Please make sire your battery supports 10a continuous at minimum if its going on the cc.
One thing id like to see implemented on the cc is a collapsible spring system. Similar to the gpin. If heres a shirt the spring collapses and battery contact isn't possible. I get the cc is for experts but I'm sire Corey could work a small safety spring in there.
Also Corey. A y thought on the receiver button for soft release tom screw into ? Or would tou do a 1off button if i send you specs ?
Meant to post these last night, but had to hurry up and meet an old friend for dinner.......
And this is what's happenin' tonight........
And this is what's happenin' tonight........
Sorry to hear about the car trouble, Sloth.
Also, sorry to hear about the ex jackin' you around on seeing your your baby girl, h00ligan.
Hot springs in mods make me sad.
No can do... Sorry, buddy.
I could pro'ly do a custom button for you, as long as you're not in a big hurry for it.
Also, sorry to hear about the ex jackin' you around on seeing your your baby girl, h00ligan.
Hot springs in mods make me sad.
No can do... Sorry, buddy.
I could pro'ly do a custom button for you, as long as you're not in a big hurry for it.
Sorry to hear about the car trouble, Sloth.
Also, sorry to hear about the ex jackin' you around on seeing your your baby girl, h00ligan.
Hot springs in mods make me sad.
No can do... Sorry, buddy.
I could pro'ly do a custom button for you, as long as you're not in a big hurry for it.
Im not sure what a hot spring is. Sorry for bringing it up though! No hurry on the button. You can pm me a price and i can be tour guinnea pig to decide if its something you want to
Do. And send thread specs etc. it will have to be shorter than the standard button considerably. Probably a mm or two longer than the post depth. Im going to check dimensions on s couple cameras for height too. I need to be in touch about An order too. Are the dual and 26650 mods for sale now ?
Im s little behind as you can see. Sorry. Ill try to keep up better. what are the screws for ?
Does this look right for the new 510? Either everyone is making atomizers that are way too long or i have this installed incorrectly.
Its like everything is at an off angle ending up slightly / . No its not cross threaded
See how far out the white part is - which leads to issues with the arm stating where it should when an atomizer is removed.
The past three or four atomizers I've tried are longer than the allowed standard area when the white part is screwed down all the way as it should be like this
So i feel i must have something in wrong
When the assembly is as i think it should he this is how atomizers wind up
The white part is screwed in and the 510 is all the way down you can tell from
The length of the feed stem
Its like everything is at an off angle ending up slightly / . No its not cross threaded
See how far out the white part is - which leads to issues with the arm stating where it should when an atomizer is removed.
The past three or four atomizers I've tried are longer than the allowed standard area when the white part is screwed down all the way as it should be like this
So i feel i must have something in wrong
When the assembly is as i think it should he this is how atomizers wind up
The white part is screwed in and the 510 is all the way down you can tell from
The length of the feed stem
Last edited:
Reverse your thinking... screw down the atty to have your air holes lined up to your liking and then put the rest in from the bottom to meet up with it.
Thanks, Irish.
This should help with adjusting the new 510...
This should help with adjusting the new 510...
These buttons look sexy! I'm feeling like Gollum, waiting for my precious to make its way to me.
Last edited:
- Status
