Made it! 600 mile drive ended up taking an extra hour due to construction/traffic. Then another hour to figure out how my contractors managed to kill my internet here. I knew it had been down for a couple of weeks but had no idea why. All good now.
BF Mods by Custom-Classic
- Thread starter custom-classic
- Start date
- th_trl_thread_readers 0
- Status
first world problemsCC Spa Day happened at Drifters place today too
Only five more to do.....
first world problems
Yah really. My heart bleeds for the drifter .
What's involved in your spa day @thedrifter ?
1 Black delrin button, you say?
No problem, my good man. I'll knock ya one out when I make h00ligan's Ultem one.
Please keep the bedroom pichers to PG-13 standards, if you don' mind.
It's a family thread!!!
I just saw this. Woohoo Ultem button!
I'm about to sell 90% of my. Along gear at which point I hope to be able to finance a second cc in titanium. Hopefully you will still have one in a month or so.
I have a mm mod coming that a friend made me an offer I couldn't refuse on, my goal is to turn my collection of lower to mid level mods into a few high end ones and finish buying / hobbling, and I want the CC's to be the main focus.
Does anyone have any recommendations on MTL atomizers for the cc? I feel like I've tried most of them and I love the origin little but I don't like the way it comes apart. I want a single too cap. I love the flavor of the noname notoy but I hate the fact it over squonks if you breathe on it. So I'm still looking for two MTL atomizers that have flavor similar to those but better functionality. I'm going to try and stuff the notoy with cotton and see if that solves the issue but I am rosette sure the design with the air holes how they are is the issue.
Since you guys are all a bunch of bottom feeders
I figured this is the place to ask! I love that. Bottom feeders and it's a good thing.
Last edited:
I don't understand. Once you figure out what you want for airflow, you crank the topcap pieces together tightly in that configuration and it acts like a one-piece topcap.
I need to send mine in, she needs some time and TLC at the spa.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Hey all....still following along, though I have less time to actually post lately. I hired a new calling service, since my last one was, well, complete crap. This new one has had me booked every day since I joined with them. Just finished the season finale of Grey's Anatomy, a 6 day shoot, both on location and in the studio.
Brassy is in sore need of a spa day
Sadly, I have a ding now from trying to fill the bottle while sleepy...dropped the top cap, and now have a ding where the top and body meet...no more seemless joint
. It was actually bad enough that it kept the top part from sitting flush on the body, but I fixed that, so I tell myself it's just a character adding battle scar
Brassy is in sore need of a spa day
Sadly, I have a ding now from trying to fill the bottle while sleepy...dropped the top cap, and now have a ding where the top and body meet...no more seemless joint
. It was actually bad enough that it kept the top part from sitting flush on the body, but I fixed that, so I tell myself it's just a character adding battle scar
The one I tried the cap was so tight it was almost impossible to get off without the top cap unscrewing slightly. I'm also someone who prefers bottom airflow bough the origin is so small that is less of an issue. Maybe I'll try it again. See if I can borrow it from my friend. Thanks.
By the way with the method of refinishing I posted. If you want to get that last five percent. Or closer to how it looks when Corey does it
After the rebrush (3-5 passes) you can run the sunshine over it very gently one more time to leave the brush lines but remove some haze. I didn't initially mention this because it adds more fiddling and isn't necessary but it does make it look just s bit better.
Here is he difference after brushing the small pass with sunshine and dehazing. It just adds a little shine back.
The thing is if you're doing this often it's a fiddly step that really isn't worth the time. But for those trying this for the first time after you brush try one gentle pass with sunshine to add a little luster back. Of course you have to wipe down with damp cloth and dry again due to he black leave behinds of the sunshine cloth.
This step is really only for the .....
After the rebrush (3-5 passes) you can run the sunshine over it very gently one more time to leave the brush lines but remove some haze. I didn't initially mention this because it adds more fiddling and isn't necessary but it does make it look just s bit better.
Here is he difference after brushing the small pass with sunshine and dehazing. It just adds a little shine back.
The thing is if you're doing this often it's a fiddly step that really isn't worth the time. But for those trying this for the first time after you brush try one gentle pass with sunshine to add a little luster back. Of course you have to wipe down with damp cloth and dry again due to he black leave behinds of the sunshine cloth.
This step is really only for the .....
Yes, just something to keep the hands busy and the brews a flowin
Little vid of it in action:
http://www.mediafire.com/file/umfzm9tci18utvu/2017-04-09_18.43.32.mov
Yes, just something to keep the hands busy and the brews a flowin
Little vid of it in action:
http://www.mediafire.com/file/umfzm9tci18utvu/2017-04-09_18.43.32.mov
Your work is always inspiring
I'm here to make a confession, I have become the laziest vaper ever
You guys put me to shame. The only polishing I've done in quite awhile is a contact, I haven't mixed any juice in months, it's been weeks (probably a couple of months) since I last changed a wick and longer than that since I wrapped a coil.
After the last couple of pages I can't go on like this, I'm inspired
Sunshine clothes are ordered, thanks @h00ligan , and should be here before my next day off. I will post before (please don't judge me
) and after pics. Welcome back Uwe!
Carry on
Yes, just something to keep the hands busy and the brews a flowin
Little vid of it in action:
http://www.mediafire.com/file/umfzm9tci18utvu/2017-04-09_18.43.32.mov
Too cool Marcus.
....? I like meticulous better.
Sent from my iPhone using Tapatalk
.... Step
Color me brown
How do you like your spinner. Made it huh. Wow. I wish I had those skills ? we brownies can hang out together.
Your work is always inspiring
I'm here to make a confession, I have become the laziest vaper ever
You guys put me to shame. The only polishing I've done in quite awhile is a contact, I haven't mixed any juice in months, it's been weeks (probably a couple of months) since I last changed a wick and longer than that since I wrapped a coil.
After the last couple of pages I can't go on like this, I'm inspired
Sunshine clothes are ordered, thanks @h00ligan , and should be here before my next day off. I will post before (please don't judge me
Welcome back Uwe!
Carry on
You're going to love how easy this is then. I'm not one for endless polishing. I did just polish Daisy Mae's fountain bowl with barkeepers friend as the hard water had built up but I get motivated for her.
- Status
