BF Mods by Custom-Classic

[Mermaaan]

What CC model? The dual cell ones will take 24mm. Singles 22mm only. Unsure on 26650.

Dual parallel will mean less battery sag at 0.2 too.

Stumpy or nuppin if you can get used ones.

Failing that. I think the hadaly will be too restricted for you. Auth narda are like hens teeth. But clones are good.

I drill my air holes to 3mm and place them where red lines are. Not through the posts.

Wasp and gorge for cheaper too

Sent from my LG-H815 using Tapatalk

Love the gorge! Great build quality and a little more airy than the wasp.


Sent from my iPhone using Tapatalk Pro

 

[Mermaaan]

Pulse 22 is another great one if you like lots of air - similar single coil in the center design also.


Sent from my iPhone using Tapatalk Pro

 

[custom-classic]

The 26650, and both dual 18650's take up to a 24mm atty perfectly, with no overhang. The single 18650 Classics take up to a 22mm atty with no overhang.

 

[Mermaaan]

The 26650, and both dual 18650's take up to a 24mm atty perfectly, with no overhang. The single 18650 Classics take up to a 22mm atty with no overhang.

Good to know Corey! Now about those silver contacts...


Sent from my iPhone using Tapatalk Pro

 

[phirt]

Thanks for the suggestions! Im getting a 7068 single so 22mm for me.

I do have a wasp i managed to lose the bf pin for so i will test out some builds on that to help decide if i can go single coil., have a bit of time before the mod would come anyway.

I could always just grab a 22 goon as a safe option but want something better for flavor.

 

[Mermaaan]

have a bit of time before the mod would come anyway.

Maybe not


Sent from my iPhone using Tapatalk Pro

 

[phirt]

Pulse 22 is another great one if you like lots of air - similar single coil in the center design also.


Sent from my iPhone using Tapatalk Pro

Ive actually got a pulse and enjoy that - what kind of coil can i put in that to get a similar vape to something like a dual parralel around .2?

 

[Doffy]

Maybe not


Sent from my iPhone using Tapatalk Pro

shipping to australia...

 

[phirt]

Maybe not


Sent from my iPhone using Tapatalk Pro

I have to wait for my tax back at least or work out a way to explain to my partner i spent that much money on a vape

 

[Mermaaan]

Well you know it can handle a pretty big coil, and at the wattage you like I might try something large and parallel. I don't build that low myself. I'm just getting back into mechs again with my CC. I stick to the .4 - .8 range myself though typically.


Sent from my iPhone using Tapatalk Pro

 

[Doffy]

for 4.2v mechs, which all the CCs are

kanthal 28awg
nichrome 26awg
SS 24awg

would be my limits for dual or parallel coils

i run parallel 26 nichrome, 4 wraps on 2.5mm for around 0.25

but on parallel batteries, so closer to 4.2v than a single

ramp up is instant that way

 

[Rossum]

for 4.2v mechs, which all the CCs are

kanthal 28awg
nichrome 26awg
SS 24awg

would be my limits for dual or parallel coils

This makes little sense to me. For the same coil geometry, a coil made of 26awg nichrome will have considerably lower resistance than one made of 28awg kanthal, and 24awg SS will be lower still.

FWIW, my go-to build in my Nuppins is duals made of 26awg kanthal, netting out about 0.5, and I tootle-puff that.

 

[Doffy]

This makes little sense to me. For the same coil geometry, a coil made of 26awg nichrome will have considerably lower resistance than one made of 28awg kanthal, and 24awg SS will be lower still.

FWIW, my go-to build in my Nuppins is duals made of 26awg kanthal, netting out about 0.5, and I tootle-puff that.

Kanthal ramps up slower. So to heat as fast as nichrome 26awg needs thinner. Regardless of resistance.

Just for my tastes

Sent from my LG-H815 using Tapatalk

 

[Rossum]

Kanthal ramps up slower.

Sure, because it has higher resistance...

 

[Doffy]

Sure, because it has higher resistance...

Which doesn't change my point at all

Sent from my LG-H815 using Tapatalk

 

[Mermaaan]

Vape mail! Hadaly arrived at the same time and the freehand S shortly after while I was building the hadaly.

The CC is amazing Corey! Looks like I am back into mechs again.

This thing is my new daily driver!


Sent from my iPhone using Tapatalk Pro

 

[custom-classic]

Nice!

Great picher, buddy.

 

[Rossum]

Vape courier!
(ordered Sunday. Shipped Monday from Romania. Arrived here in FL today)

Not sure what I think of this thing just yet...

 

[Mermaaan]

Vape courier!
(ordered Sunday. Shipped Monday from Romania. Arrived here in FL today)

Not sure what I think of this thing just yet...

I've been curious about this one. Definitely interested in hearing your thoughts once you've given it a good run. It's so tall!


Sent from my iPhone using Tapatalk Pro

 

[Boobsley]

Welcome Merman & Phert. Glad to have new people around. Hope you both love the CC's as much as I do.