Thanks man, you inspired me, lol.
On the black one i actually made two holes, one on each side, that way i can hold the tank/tube with two fingers while lifting the top for refilling, works great.
Big Daddy Vapor - 5ml Dual Coil Tanks
- Thread starter kcblack3
- Start date
- th_trl_thread_readers 0
- Status
Thanks man, you inspired me, lol.
On the black one i actually made two holes, one on each side, that way i can hold the tank/tube with two fingers while lifting the top for refilling, works great.
Ohh some regular resistence with higher ohms. I know the dual coils are supposed to make 3.7 volts seem like a 6v but some of my juice is just better at 6. I think that the combo I have is the next best thing to direct dripping. I love it. Can you recommend a Place to get the right sized prepunched catros???What kind would you like for us to carry? We love suggestions as to what you guys want.
Thanks Wicked
Punching cartos? simple saddle value. i make a video today or this weekend showing where to line it up for big daddy tanks..very simple and fast. you can get a saddle value from Big daddy vapor i think they have them.
but if you must have prepunched carts (i still buy them from time to time) they have them on big daddy vapor webpage aslo. I would stay away from COV prepunch cartos, I just order some from Madvapes to see how they work. they are post to work with the DCT tanks and should have no problem with Big daddys..but really big daddy is only page you need for all your tank stuff...
saddle valve is great, easy to use and cheap. Either online or if you have a lowes home improvement for $4.47
Shop EASTMAN Brass Icemaker Saddle Valve at Lowes.com
I got the one for $6.68 since it had that little rubber bracket to support the carto from shifting,
Shop EASTMAN Brass Icemaker Saddle Valve at Lowes.com
I got the one for $6.68 since it had that little rubber bracket to support the carto from shifting,
Last edited:
What kind would you like for us to carry? We love suggestions as to what you guys want.
Some sr with higher ohms would be sweet. Size ~ both xl and reg's would be great then they'd fit both big daddy and lil mama. I have an original buzz so I have to keep it low for the dcc's.
We have restocked our products on our site. Thank you all for your patience. 
Big Daddy @ Lil' mama
Thanks, order placed . Now I am collecting.....LOL
OK guys. I am SO CLOSE to pulling the trigger on a Lil Mamma. Here is my predicament. I want a tank exclusively for my cinnamon juices so I found that Big Daddy vapor offers pyrex and stainless steel tubing. I REALLY want the stainless caps with a pyrex tube. I read that it is not recommended(for obvious reasons) but is pretty much a guarantee that it WILL break against the stainless caps? Or if Im careful with it I should be fine? Any advice would be greatly appreciated!
Thanks in advance!
Thanks in advance!
Nah,SS and pyrex don't mix too well.I had a pyrex tank(a different vendor) and as soon as I snapped in the cap a crack instantly appeared in the pyrex.Others might get 'em to work,I ain't even gonna try again.A stainless tube is your best bet,but ya can't see how much liquid is left.
Understand your delima korova8...
As we've entered the world of tanks, we've also entered an alternate universe... one of tolerances! LOL Everything on the tank is allowed a tolerance distance/span allowance from the poly tubes to our machinist that makes our caps. So although the delrin and SS is suppose to be the same dimensions... it's was obvious when we went to put a set of SS in the pyrex it wasn't going to go easy. Which is a good thing, and what we're looking for so nothing leaks. But NOT in the case of pyrex.
We have recently changed our o-ring kit. We had some o-rings custom made to help with the issue of tolerance, but the #4 o-ring is for the outside to make it snugger in poly and SS tubes so it won't be a help in the pyrex. Sorry not a solution yet to make the SS work with pyrex. Simply because 1/2 of our stock on our very first order of pyrex showed up at our door broke...very, extremely, incredibly poor packaging. And we don't know if we are going to make another run of them. So in the mean time delrin should work, but it's not recommended to try the SS. Wish I could have a different answer for you. We could use some feedback on the pyrex though, so we can decide if were going to continue developing them.
Sorry, but I hope this helps making your decision.
Lil' mama
As we've entered the world of tanks, we've also entered an alternate universe... one of tolerances! LOL Everything on the tank is allowed a tolerance distance/span allowance from the poly tubes to our machinist that makes our caps. So although the delrin and SS is suppose to be the same dimensions... it's was obvious when we went to put a set of SS in the pyrex it wasn't going to go easy. Which is a good thing, and what we're looking for so nothing leaks. But NOT in the case of pyrex.
We have recently changed our o-ring kit. We had some o-rings custom made to help with the issue of tolerance, but the #4 o-ring is for the outside to make it snugger in poly and SS tubes so it won't be a help in the pyrex. Sorry not a solution yet to make the SS work with pyrex. Simply because 1/2 of our stock on our very first order of pyrex showed up at our door broke...very, extremely, incredibly poor packaging. And we don't know if we are going to make another run of them. So in the mean time delrin should work, but it's not recommended to try the SS. Wish I could have a different answer for you. We could use some feedback on the pyrex though, so we can decide if were going to continue developing them.
Sorry, but I hope this helps making your decision.
Lil' mama
Last edited:
Big Daddy was wispering in my ears yesterday("I feel lonly, get me Lil Mama"), and could not resist had to place an order for a Lil Mama SS caps kit and a extra drip tip
Aziffel, Lil Mamma, I greatly appreciate the responses. Im going to take your word for it so last night I ordered a SS tank set along with a SS tube! Should look pretty slick on my satin Provari. I am totally stoked and cant wait to throw this tank on there. I also picked up some blueberry waffle juice that should work in the polycarbonate so I can show off the killer tank while being able to monitor my juice consumption. Thanks for the advice!
Yeah I totally get ya! Their so much better as a set. I like to vape root beer from madvapes in my Big Daddy, and I do a mix of 1/4 a tank of raspberry to a 1/2 tank of raspberry truffle in my lil mama.
Hope all is good for you! It's nice to be back up and running here!
Hope all is good for you! It's nice to be back up and running here!
Korova8 Yeah, I do love my SS tube. Sometimes I put a juice I plan of vaping all day in it.... it's hard not to get an idea on how much juice ya go through in a day after awhile of vapin. Other times I just check it before I go out. And if I had more than a moment I could show you how awesome it'll look on a Satin or a Gloss provari. We love ours!
Glad to hear that! You guys over at Big Daddy really produced a killer product. Ive done an immense amount of research on tanks and I have found yours to look the best! Especially with the SS caps. Thanks again and Ill give an update on my experience with it once I receive it in the mail.
- Status
Similar threads
- Locked
- Locked
