Big Daddy Vapor - 5ml Dual Coil Tanks

[Lil' Mama]

REVIEW OF THE LIL MAMA AND BIG DADDY TANK FOR ELECTRONIC CIGARETTES - YouTube

This link is our Lil' mama Euro version on a Lavatube. It has a beveled edge on the top of the cap is all that's different.

Hope that helps

Does anyone have a picture of their Lavatube with a lilmama tank? I went through all of 25 attachments but didnt see one.

 

[seven]

thanks! ill place an order at during my lunch break today.

 

[mRzv]

They don't always scan when it leaves US customs. I am confident all is well. This has happened before and everything has a way of eventually arriving just fine.

John

Ok, i can understand this...but it's the lack of information (track updating) is what bother me.
It's the first package not scanned from USA.
If the tracking would say that yestarday the package was still in the USA it wouldn't be a problem because i would know that i must have patience.
But if the tracking doesn't update...i'm thinking that the package is lost...
Today i've called local customs to see if they have anything for me but there was nothing
And it's been 7 days since you shipped...

 

[Lil' Mama]

Ok...
This is what we know about UsPs... intl. delivery is 6-10 business days during normal shipping seasons, expect delays during holidays especially Christmas and New Years... with internet sales going up as they have. Also to go overseas the packages have to go to an international airport, Chicago being like 1 of (i think) 7, also Kansas City being one. They go out through all different airports which after that it isn't tracked until it's at your door. Then it'll let us know it's been delivered. UsPs can only track it to the intl. airport. Don't worry we see this all the time. Give a bit more time. And if you do keep calling customs to check... by golly be nice so they don't flag ya'.
Hope this helps.

Ok, i can understand this...but it's the lack of information (track updating) is what bother me.
It's the first package not scanned from USA.
If the tracking would say that yestarday the package was still in the USA it wouldn't be a problem because i would know that i must have patience.
But if the tracking doesn't update...i'm thinking that the package is lost...
Today i've called local customs to see if they have anything for me but there was nothing
And it's been 7 days since you shipped...

 

[bandmom5]

I would like to give BDV some praise here. I had an issue with an order. (Got lost and finally found by USPS) Any way, the communication was top notch. Every email I sent was answered almost immediately. So I would like to say that you will have a long time customer here. THANKS FOR EVERYTHING.

 

[mRzv]

Don't get me wrong...BDV it's great from my point of view too.It's the tracking system/usps i'm blaming!
Anyway, i will wait until 15 january...if it doesn't update or doesn't arrive it's clear.


Sent from my iPad using Tapatalk

 

[Lil' Mama]

Let us welcome the "Who's Your Daddy?" tank to our vaping family. With the windowed tube Fabricated entirely in house by Big Daddy and Lil' mama, this Homemade American made beauty is one of a kind. We understand that tank covers have been done before but NEVER before has a window tank been produced that NO juice can melt until now! And thanks to the support of our vaping family in funds, yes, but also great ideas, communication, motivation, and inspiration we have been able to put our heart, sweat, knuckle busters with some tears...lol into something we've all been wanting. Each Who's Your Daddy tank will come with it's own set of beautiful caps to ensure the absolute best fit and look and will also be available in the 3ml "Lil' mama" and the 5ml "Big Daddy" size.

How much money? We are working on that and will know once we're totally up and running for large production. But do know that we appreciate our vaping family, and take to heart and mind always that by buying our products You are investing in bringing the vaping community a quality, affordable, outstanding vaping experience. And we will strive to keep it coming.

When are they coming?? We're looking to have the product pages on the website in a couple weeks for you to be able to put yourself on the notification list. Then we're shooting for our 1st run being end of the month or a bit after. But we have a bit to do and hurdles to jump, a yellow brick road some where to follow and we'll be ready to go.

Special thanks to Extol for putting our prototype through the ringer...as always we appreciate your honest opinion, and your video.



Lil' mama Big Daddy

 

[Extol]

still putting this thing though test...one of my friends is sending me some juice to test that he claims breaks tubes in mins!. well we will see what happens in this bad boy..

so far not a single leak.
no cracking at all,
best tank i have own,
will buy more! you can't let these tanks pass you buy

 

[Lil' Mama]

Nice, awesome please keep up the testing. We also have someone testing it that has juice so spicy it melts not only poly but drip tips also. No seriously, we also sent him a stainless steel drip we had laying around to make sure he had something to test that tank with some of that juice. Also like 16 drip tips too that he ordered, so he's no joke. We haven't heard from him... which is a good thing. Will check in with him today to get some results there too.
So very sweet, thanks again!
"For the love of vapin"
Lil' mama Big Daddy

still putting this thing though test...one of my friends is sending me some juice to test that he claims breaks tubes in mins!. well we will see what happens in this bad boy..

so far not a single leak.
no cracking at all,
best tank i have own,
will buy more! you can't let these tanks pass you buy

 

[Extol]

i have a lot of people ask me when they be able to get them and where at...i think this is going to be a real winner...

 

[Lady M]

My 2 cents I have bdv and little mama tanks., I found I like the Ss top and bottom easy to work with and my deralin. kinda hard.

 

[SKYYcamel]

Any plans of doing your tanks with the fill screw installed?

 

[kcblack3]

We have not been able to get it to seal properly...we have something coming soon to make filling a breeze and stop the cutting of the inside orings with the carto.

Any plans of doing your tanks with the fill screw installed?

 

[SKYYcamel]

We have not been able to get it to seal properly...we have something coming soon to make filling a breeze and stop the cutting of the inside orings with the carto.

Sounds good.

 

[stretchpants]

I prefer the delrin because they are lighter. LOL

My 2 cents I have bdv and little mama tanks., I found I like the Ss top and bottom easy to work with and my deralin. kinda hard.

 

[Lady M]

Very True strechpants I like getting a workout when I pick up my provari. With SS big daddy. Say I need the exact size of the little mama and the big daddy I am having a custom mod built by B rad SWEETVAPES. he makes the Grips and on mine I want the tank built in. He has one posted in his thread with built in lava tank it is beautiful. I just what to stick with Big Daddy and Little mama so my be little mama could chime in wither those sizes for me.

 

[kcblack3]

The diameter of both tubes is 3/4" The caps are .850 inches and the height of each with caps is 1.40 inches for the lil mama and 1.8 inches for the big daddy.

Let us know if you need anything else.

Very True strechpants I like getting a workout when I pick up my provari. With SS big daddy. Say I need the exact size of the little mama and the big daddy I am having a custom mod built by B rad SWEETVAPES. he makes the Grips and on mine I want the tank built in. He has one posted in his thread with built in lava tank it is beautiful. I just what to stick with Big Daddy and Little mama so my be little mama could chime in wither those sizes for me.

 

[Lady M]

Ttanks big daddy I will get this info to Brad at Sweetvapes . Their is a bit of time before he starts on mine but when its ready and I have of picture I will share it with you, this is going to be one Rockin Sweetvape mod with the tank built in.

 

[Lil' Mama]

TY Babe for taking care of Lady M and letting me stay crashed out on da couch. Sometimes the body can't give what the brain wants..lol Shown once again "You truly complete me"
Love you!!!

 

[Lil' Mama]

Would love to see it when it arrives! Went to his page and they are beautiful... man I love hardwoods... zebrawood being one of my favorites. It's up there with walnut as far as a tool dulling wood to work with, but the end results are so much worth it. I'm self teaching myself right now on making homemade inlays, which isn't really hard... more taking of a steady hand, some patience, along with a couple common sense tricks.
Sorry if I went off the wooded grain on ya'... it's just right down my alley.
Can't wait to see it.

Ttanks big daddy I will get this info to Brad at Sweetvapes . Their is a bit of time before he starts on mine but when its ready and I have of picture I will share it with you, this is going to be one Rockin Sweetvape mod with the tank built in.