Boge 2.0 ohm Carts Getting way too hot ?

[RobbieVap]

I'm using a Kgo 1100 mah battery which is around 3.7-4.0 volts charged ? Shouldn't that be fine for a 2.0 ohm cart?
I can't even take a draw because the vapor is so hot it burns my throat , and I can't taste any flavor at all . Any reason this is happening ?

 

[RobbieVap]

Any ideas please ? I'm dieing to vape but it's like inhaling fireballs . Do you think I'm doing something wrong , is the atomizer in the cart overheating ? Anything I should try ? Please help I'd appreciate it a lot

 

[PEneoark]

Carts or cartos? Either way, sounds like it's getting way too hot. Do you have another you can try?

Sent from my SGH-I897 using Tapatalk 2

 

[RobbieVap]

Cart meaning cartidge and carto meaning cartomizer ? Yeah Cartomizer , I tried 2 and both are doing the same thing , after about tooting for one second the vapor becomes scalding hot

 

[Orobas]

i usually get 1.7ish ohms and don't have this problem on the kgo. Do you have a second battery to try?

 

[RobbieVap]

Yeah I just tried again with the other battery and it's the same thing . Could it be too little or too much juice in the carto that could cause the problem?

 

[440BB]

Maybe there isn't enough juice soaked in and you're getting that burn from a dry coil. If you had too much juice, you'd get gurgling and a tight draw with little vapor. If you're in doubt, soak it to overfull, wait a few minutes and blow it out. The burnt flavor will remain though. The 2.0 ohm Boge's require more frequent topping off too and aren't too forgiving when they're not wet. Good luck!

 

[440BB]

Another possibility is that the hotter carto is hitting your throat too hard, if you're inhaling like you would a cigarette. Many of us started by inhaling that way and it was burning the back of our throats. In case you are inhaling, try puffing it into your mouth with a slow draw, then inhaling the vapor. Sort of like a cigar puff, then inhale. Cooler vape and easier on the throat. Most of the nicotine absorption occurs in the mouth tissues anyway, and some people just puff and don't inhale at all.

 

[RobbieVap]

Thanks I appreciate the help ! The vision clearomizer is working AMAZING on the kgo vv , I wish the cartos would work like that, I'm scared to bring it around in my pocket though , are the tanks durable ? And any other cartos besides boge you'd reccomend yourself ? I'd like to use a good carto with a tank or just get a drip tip -_- . I wish I knew how I could fix this .

 

[440BB]

I've been using Vision Ego clearomizers and they take pretty rough handling. I don't think you'd have a problem unless it took a pretty good fall. You might want to try regular Boge SR cartos - mine test out at 2.6 ohms. You'd get a cooler vape that you could adjust on that vv device. Smoktech dual coils work well for me too at 1.5 ohm. A drip tip always helps on regular cartos, just a little more distance between the juice and your mouth.

 

[r77r7r]

Thanks I appreciate the help ! The vision clearomizer is working AMAZING on the kgo vv , I wish the cartos would work like that, I'm scared to bring it around in my pocket though , are the tanks durable ? And any other cartos besides boge you'd reccomend yourself ? I'd like to use a good carto with a tank or just get a drip tip -_- . I wish I knew how I could fix this .

Since Boge got crappy a few months ago, some have switched to Smoketech 1.7-2.0, or Kangers. Ikenvape.com has good ones also.

 

[PEneoark]

Yeah, I was reading about tons of people getting bad boxes of Boges. That's too bad. I honestly have never used them.

Sent from my SGH-I897 using Tapatalk 2

 

[Unforeseen]

Moved from General E-Smoking Discussion to Assorted PV Topics - Cartomizers