Boge cartomizers on joye 510

Status
Not open for further replies.

sixstringgirl

Full Member
Sep 4, 2011
57
16
Boston
I ordered some standard boge cartomizers from the Liberty Flights web site. and I tried them out today on my Joye 510 but it feels like i'm sucking on air. I have to draw really lightly on my e cig to get a good drag.

I thought maybe I got a dud, but i just filled a second cartomizer with a different flavor and its the same thing


I looked at the resistance of the cartomizers and it says 2.7 ohms. Was I sent the incorrect type? or is this normal.

Am I over fill? under fill? doing something wrong ? or was I sent the incorrect cartomizers?

Help ! I was pretty psyched when ordering them. I hope i'm not disappointed. :(
 

rwnielsen

Test Pilot
ECF Veteran
Verified Member
Oct 7, 2010
534
145
Long Beach CA
Howdy
You have to make sure they're full. Shake 'em like a thermometer, they should look kinda wet around the top (without gurgling)
2.7 is OK for your 510. Do they crackle at all when you press the button?


*edit* I draw pretty lightly on the LR version on an old eGo battery to get a good hit
 
Last edited:

washvap

Vaping Master
ECF Veteran
Apr 2, 2011
6,018
4,442
wa

dormouse

ECF Guru
ECF Veteran
Oct 31, 2010
12,347
1,611
Pennsylvania
I don't use the condom method. An overfilled carto vapes crappy like a flooded atomizer. And underfilled one will singe.

Here is how I fill and what I use. I can get 10+ days out of each Boge. My current Boge has over 2 weeks of use (which for me is over a month because I vape 510 models 1/2 the time, and KR8 half the time)

-----

How I fill Vapor4Life KR8 cartos and Boge 510 cartos

I use thin clear juice, PG w/ 20% or less VG and I avoid all juices that drop flavoring sediment in the stuffing (ruins drag and shortens carto life)

With the carto off the battery... Pop out the soft cap with an unbent paperclip in the mouth hole, very careful not to catch stuffing or the wire loop.
Shake and open the eliquid

Fill
Hold a bit of tissue on the threaded end hole, tilt the carto, and add 18 drops per ml of capacity into the stuffing (Boges and most KR8 cartos are about 1ml).
Wait 15 seconds or so then see how many more drops the carto stuffing will soak in easily.

Cleanup
Clean up the threaded end, tilt open end down into tissue, puff into threaded end to clear air channel (Boges and the KR8 cartos I use have a defined center air channel and I want to see light through that) While the carto is still open end down, touch a soft bunch of tissue to the top of the stuffing to get the loose juice - this will help prevent leaks.

Settle (first fill only)
Cap and let it settle - I lay it on different sides for 15-20 minutes to make sure every bit of stuffing gets damp so I won't singe the carto. if you use thicker juice than me (I use 20% VG or less) then you may need to wait much longer.

While vaping
While vaping, if the vapor gets a bit light or a bit dry or the carto is getting hotter than normal, I take the carto off the battery and add eliquid. Also, I use such light sediment-free juices, I can look at the stuffing and see if it needs juice because the stuffing goes back to near-white.

I often use a plastic or delrin drip tip as a mouthpiece on Boge and KR8 cartos (not to drip into since the juice would head for the central air channel). Easy to pop out to add juice.
 

xiotaki

Senior Member
ECF Veteran
Sep 3, 2011
105
22
new orleans
@op

I had some unfavorable experiences with the boges as well, both standard and low resistance ones. Long story short I really was impressed with the slightly different cartos you can get from the cignot website.
For more detail on this check out the thread I made about it a few days ago

http://www.e-cigarette-forum.com/fo...-cartomizers-drastically-different-seems.html


Whether it's my lack of knowledge on how to use the boges or anything else, one thing is for sure the cignot ones just work! Lol I sound like an apple customer but it's true... hope this helps!
 

tj99959

ECF Guru
ECF Veteran
  • Aug 13, 2011
    15,116
    39,600
    utah
    Don't be to quick to blame the carto, maybe you need to blame the battery.
    There really is a reason that most of us use larger ones.

    But, it is not all that uncommon to run into a carto, or an atty for that matter, that will have to light a draw for your liking.
    Here is a simple solution:
    P1000467.jpg

    See the o-ring? That is a 40 cent #5 o-ring from ACE Hardare. Just slide it up with your thumb nail until it partially covers the connection to adjust the draw to as stiff as you like.
     

    xiotaki

    Senior Member
    ECF Veteran
    Sep 3, 2011
    105
    22
    new orleans
    :laugh:
    Also 35% VG is a bit thick for most standard stuffing cartos. I can even feel 30% ruin the airflow. Maybe the Cignots have looser stuffing or the extra heat of 2.7 loosens the juice a bit.

    oof, if that's true, then my cartos are in trouble! i just received some liquid from AVE and when I tilt the bottle it looks like a slow-mo action shot :laugh: what do you suggest for a 280 mah battery and thick liquids?
     
    Status
    Not open for further replies.

    Users who are viewing this thread