Box mods

Status
Not open for further replies.

Jim211

Senior Member
ECF Veteran
Sep 18, 2010
247
12
North Carolina, USA
Only places I know are what congaman said. www.boxmod.net or Welcome to MadVapes LLC Personally I build my own from parts from madvapes. Usually with a single 14500 (aa) I get 8 hours most of the time. They are cheap enough to build you can have 1 for a 510 and 1 for a 901 or just go with a 510 and use a 510-901 adaptor. The last 2 I built cost $5 for the small one and $8 for the clear one.
 

DirtyLefty

Full Member
Oct 7, 2010
63
7
hartford, ct
I went with a Mini REO (www.reosmods.com) made by redeyedancer from these forums.

All box mods have a learning curve! It took me about 2 weeks to get it to a sweet spot.. and man, that spot is sweet! Goes all day on a 14500 battery, carries 3ml of juice (I refill it once a night), goes through airport security (disassemble and place in liquids bag). Has pocket fire prevention switch, DOESN"T LEAK, and is all around awesome.
 

Twist

Full Member
Sep 14, 2010
63
0
Idaho
I've made a few box mods with parts from Madvapes as well. I have never soldered electronics before I attempted it, but that was the easy part. Right now they have kits available that have the battery boxes predrilled! The drilling is the only part you might make a bad mistake, so the kits are awesome. You can pick up the kit, 2 batteries and a charger for less then $25 right now!

The 14500 batteries can easily go 8 hours, their capacity is 5x that of a standard e-cig.
 

Jim211

Senior Member
ECF Veteran
Sep 18, 2010
247
12
North Carolina, USA
I just took a pic of all the boxmods I still have. Just so you have an idea they all take 14500 900 mah batteries. The one on the far left takes 2 batteries and is variable voltage and batteries always last a full day on that one. The others take 1 battery and sometimes I get a whole days worth but usually about 7-8 hours if I'm just using 1.
 

Attachments

  • mods.jpg
    mods.jpg
    20.9 KB · Views: 10
Status
Not open for further replies.

Users who are viewing this thread