The BP MODS Pioneer Dot RBA MTL/RDL RBA for Dotmod AIO is designed for Dotmod AIO, SE, and DotAIO V2, engineering to both MTL and RDL vaping and accommodating 2ml e-liquid with its top filling. It features top secured according to flathead screws, one single-coil deck with dual post build deck, designed for easy pulling the deck down. The airflow enters the cartridge and accesses two parallel posts, along with 7 swappable airflow pins from 0.8mm to 3mm in diameter, the airflow is adjustable by interchangeable pins, which can personalize your MTL or RDL vape. When you want to change your airflow pin, unscrew the installed pin at the bottom and then screw a different size airflow pin. The cup placed under the tray plays an essential role in guiding the airflow into the cartridge and stem the e-liquid leakage with a better solution. On the side of the deck, there have enough and large space to allow the cotton to slide simply, as well as guarantee the full saturation for superb flavor.
Features:
1 * BP MODS Pioneer Dot RBA Cartridge
1 * 510 Adapter
2 * Post Screws
1 * 0.7ohm BPMODS Single Wire #1 Coil
1 * 0.55ohm BP MODS Clapton #2 Coil
1 * PEEK 510 Insulator
1 * VMQ Tank Plug
1 * Pack of O-Rings
1 * Pack of Gaskets
1 * 7 Airflow Pins (1 Pre-Installed)
Features:
- Material: Stainless Steel/Diamond-Like Carbon (DLC)
- Sizes: 0.8 / 1.0 / 1.2 / 1.5 / 2.0 / 2.5 / 3.0
- Capacity: 2ml
- Filling system: top filling
- Compatible with: Dotmod AIO Kit/dotAIO V2
- Interchangeable Airflow Pins
- Positive Peek Insulation
- Dual Post Build Deck
1 * BP MODS Pioneer Dot RBA Cartridge
1 * 510 Adapter
2 * Post Screws
1 * 0.7ohm BPMODS Single Wire #1 Coil
1 * 0.55ohm BP MODS Clapton #2 Coil
1 * PEEK 510 Insulator
1 * VMQ Tank Plug
1 * Pack of O-Rings
1 * Pack of Gaskets
1 * 7 Airflow Pins (1 Pre-Installed)
