Hi, I have several brunhilde Mtl and want to know where I can purchase orings? I know the item comes with orings but I need more than that because to get them off is so difficult fir me ( I am old..lol)and I broke several. Can you help me?
Brunhilde Mtl question
- Thread starter Andrea Russell
- Start date
- th_trl_thread_readers 0
- Status
I don't have the tank so can't help with the o-ring sizes.
When I clean a tank I leave the o-rings in place. Saves wear and tear on them.
Here are a couple of US O-ring suppliers. If they are standard o-rings they will have them.
The O-Ring Store LLC, We make getting O-Rings easy!
Orings and More | Affordable and Quality Gaskets and Seals
When I clean a tank I leave the o-rings in place. Saves wear and tear on them.
Here are a couple of US O-ring suppliers. If they are standard o-rings they will have them.
The O-Ring Store LLC, We make getting O-Rings easy!
Orings and More | Affordable and Quality Gaskets and Seals
Last edited:
If you have a well-stocked hardware store they may carry metric-sized o-rings.
Bring them in and see if they have some that will match.
The most common black o-rings are a "Buna-N" material.
Bring them in and see if they have some that will match.
The most common black o-rings are a "Buna-N" material.
I agree with puffon. If you are not able to measure your orings, perhaps someone here can help you with that. I can't help you as I don't own that RTA.
@Andrea Russell, hello and welcome to the ECF. 
I measured my spares and here are the sizes you need for your Brunhilde MTL RTA:
1.5mm x 18.5mm 1.5mm X 18.5mm (NBR) Buna-N 70 Duro Metric O-Ring [N1.50X018.5] : The O-Ring Store LLC, We make getting O-Rings easy!
1mm x 16mm 1mm CS X 16mm ID (NBR) Buna-N 70 Duro Metric O-Ring [N1.00X016] : The O-Ring Store LLC, We make getting O-Rings easy!
1mm x 6mm 1mm CS X 6mm ID (NBR) Buna-N 70 Duro Metric O-Ring [N1.00X006] : The O-Ring Store LLC, We make getting O-Rings easy!
1mm x 5mm 1mm CS X 5mm ID (NBR) Buna-N 70 Duro Metric O-Ring [N1.00X005] : The O-Ring Store LLC, We make getting O-Rings easy!
O-rings are measured as CS x ID (cross section x inner diameter). Like so...
IMO, The O-ring Store is the best place to buy o-rings. They let you purchase in smaller quantities versus some of the other o-ring places where you have to buy in minimum quantities.
ETA: See UJ's post below mine.
I measured my spares and here are the sizes you need for your Brunhilde MTL RTA:
1.5mm x 18.5mm 1.5mm X 18.5mm (NBR) Buna-N 70 Duro Metric O-Ring [N1.50X018.5] : The O-Ring Store LLC, We make getting O-Rings easy!
1mm x 16mm 1mm CS X 16mm ID (NBR) Buna-N 70 Duro Metric O-Ring [N1.00X016] : The O-Ring Store LLC, We make getting O-Rings easy!
1mm x 6mm 1mm CS X 6mm ID (NBR) Buna-N 70 Duro Metric O-Ring [N1.00X006] : The O-Ring Store LLC, We make getting O-Rings easy!
1mm x 5mm 1mm CS X 5mm ID (NBR) Buna-N 70 Duro Metric O-Ring [N1.00X005] : The O-Ring Store LLC, We make getting O-Rings easy!
O-rings are measured as CS x ID (cross section x inner diameter). Like so...
IMO, The O-ring Store is the best place to buy o-rings. They let you purchase in smaller quantities versus some of the other o-ring places where you have to buy in minimum quantities.
ETA: See UJ's post below mine.
Last edited:
@Andrea Russell, hello and welcome to the ECF.
I measured my spares and here are the sizes you need for your Brunhilde MTL RTA:
1.5mm x 18.5mm 1.5mm X 18.5mm (NBR) Buna-N 70 Duro Metric O-Ring [N1.50X018.5] : The O-Ring Store LLC, We make getting O-Rings easy!
1mm x 16mm 1mm CS X 16mm ID (NBR) Buna-N 70 Duro Metric O-Ring [N1.00X016] : The O-Ring Store LLC, We make getting O-Rings easy!
1mm x 6mm 1mm CS X 6mm ID (NBR) Buna-N 70 Duro Metric O-Ring [N1.00X006] : The O-Ring Store LLC, We make getting O-Rings easy!
1mm x 5mm 1mm CS X 5mm ID (NBR) Buna-N 70 Duro Metric O-Ring [N1.00X005] : The O-Ring Store LLC, We make getting O-Rings easy!
O-rings are measured as CS x ID (cross section x inner diameter). Like so...
View attachment 960805
IMO, The O-ring Store is the best place to buy o-rings. They let you purchase in smaller quantities versus some of the other o-ring places where you have to buy in minimum quantities.
Wow... thanks for measuring the orings, now I know which ones to order!
Welcome and glad you joined.
Might wish to fill in your avatar location(city-state & country), it may help you in obtaining location specific information to your future question(s).
On the top right hand corner of this post you will find --"your name" next to "Inbox and Alerts"
Place the mouse pointer on your name,click. You will get a drop down and on the left hand side of this drop down you will find "Personal Details". Click Personal Details.
In Personal Details, in middle of screen in gray, you will find "Location" Could fill that box line in.
re: New users - Put your location in your Profile...
If your located in the US, this information might of allowed us to recommend a store in your neighborhood.
I got all of my extra tanks and drip tips from Sourcemore, you can get just the long drip tip by itself if you like or they have different coloured tanks and tips
Vapefly Brunhilde MTL RTA Drip Tip Fit for Vapefly Brunhilde MTL RTA
Fasttech also have a selection there to choose from.
$5.08 Vapefly Brunhilde MTL RTA Long Delrin + Stainless Steel 510 Drip Tip - authentic / w/ cooling fin at FastTech - Free Shipping
They also have tanks, just type in the word 'Brunhilde' in the search engine.
You're very welcome
I'm always around the Forum if you need any further tips on the Brunhilde
- Status
Similar threads
