Buzz pro tank help

[dysfoundation]

Ok so I will be ordering a buzz pro soon (used to have a infinity) and I also wanted to get the 1" m1a1 tank
Can anyone point me to any blank cartos that will fit this tank?? Notcigs is currently sold out and other sites are not as informative on cargo length...

Posted using
Rooted galaxy s2 -blazer rom 1.45Ghz-

 

[hificat101]

The 1" is the small tank. Almost anything will fit in it (from the standpoint of length). I use 2.5 ohm Fusions in mine, but standard Boge or Smoketech cartos will also work fine. I would watch out with "mega" cartos, because they are often but not always, a larger diameter than standards. One mega that will work are the new Ikenvape mega Fusions. They are supposed to hold 60 drops, so throw it in a tank, and you're good to go for a while. The mega Fusions will also fit well in the 1.5" notcigs tank. Then you start with 60 drops+5ml, so you'r REALLY good for awhile.

If you try the Fusions, they only come in 801, so make sure to get the appropriate adaptor. Stealth adaptors don't work on them without some tweaking.

Make sure to get stainless cartos, as the black ones will leak, and pose issues with fit because the black on them is just a sticker. If you have black ones that you want to use with it, you can peel the sticker off, then get most of the glue off. I heard someone say that peanut butter works to get the glue off.

 

[dysfoundation]

Thank you so much! I wasn't sure if It had to boge or if that was just a marketing tactic

Posted using
Rooted galaxy s2 -blazer rom 1.45Ghz-

 

[markfm]

I've used boge, ikenvape fusion, and v4l coolcarts (kanger?), no problem. Pretty sure buzzkill uses ce2.

I use a native 808 connection, with an ikenvape 901/801 adapter to handle fusions - the 2.5 ohm fusions have a solid following, very nice.

I punch using something called a hub and a sheet metal screw, fast, consistent, results. I posted a carto punch thread over in the pif area.