Caddy Shop
- Thread starter oplholik
- Start date
- th_trl_thread_readers 0
- Status
Little Known Christmas Fact
Not long ago and far away, Santa was getting ready for his annual trip...but there were problems everywhere.
Four of his elves were sick, and the trainee elves did not produce the toys as fast as the regular ones so Santa was beginning to feel the pressure of being behind schedule.
Then Mrs. Claus told Santa that her mom was coming to visit. This stressed Santa even more. When he went to harness the reindeer, he found that three of them were about to give birth and two had jumped the fence and were out, heaven knows where. More Stress. Then when he began to load the sleigh, one of the boards cracked and the toy bag fell to the ground and scattered the toys. So, frustrated, Santa went into the house for a cup of coffee and a shot of whiskey. When he went to the cupboard, he found the elves had hidden the liquor and there was nothing to drink. In his frustration, he dropped the coffee pot and it broke into hundreds of little pieces all over the he kitchen floor.
He went to get the broom and found that mice had eaten the straw it was made from.
Just then the doorbell rang and Santa cussed on his way to the door. He opened the door and there was a little angel with a great big Christmas tree. The angel said: "Where would you like to put this tree Santa?"
And that my friends, is how the little angel came to be on top of the Christmas tree.
Not long ago and far away, Santa was getting ready for his annual trip...but there were problems everywhere.
Four of his elves were sick, and the trainee elves did not produce the toys as fast as the regular ones so Santa was beginning to feel the pressure of being behind schedule.
Then Mrs. Claus told Santa that her mom was coming to visit. This stressed Santa even more. When he went to harness the reindeer, he found that three of them were about to give birth and two had jumped the fence and were out, heaven knows where. More Stress. Then when he began to load the sleigh, one of the boards cracked and the toy bag fell to the ground and scattered the toys. So, frustrated, Santa went into the house for a cup of coffee and a shot of whiskey. When he went to the cupboard, he found the elves had hidden the liquor and there was nothing to drink. In his frustration, he dropped the coffee pot and it broke into hundreds of little pieces all over the he kitchen floor.
He went to get the broom and found that mice had eaten the straw it was made from.
Just then the doorbell rang and Santa cussed on his way to the door. He opened the door and there was a little angel with a great big Christmas tree. The angel said: "Where would you like to put this tree Santa?"
And that my friends, is how the little angel came to be on top of the Christmas tree.
I am a woodworking hobbyist, and after making a few caddy’s for myself to help keep my precious pv’s in order, I thought maybe some of you might like a chance to get something that is, hopefully, unique, and special, for your pv organization.
From time to time, I’ll put up some pics of what I’m working on, and maybe even do some to your specs as far as the sizes of the holes you need for your pv. The shapes of the caddy will be pretty standard, the woods used will vary occasionaly, with an occasional exotic wood when I find a piece that can be stabilized without cracking.
I want to keep prices reasonable, as I realize that our money also needs to be spent on the necessities of vaping.
If I make something specific to fit your pv as far as hole, or slot size, I will need accurate, diameter dimensions for a tube pv, batteries, ect., and width, and thickness dimensions for a box mod.
Prices will generally run in the $20.00 to $30.00 range, there will be some a little less, and some a little more.
Payment will be by PayPal, as goods. I invoice when the caddy is ready to ship.
The caddys do take some time to complete, so some patience is required as I cannot mass produce these.
If there are any questions, feel free to pm, or e-mail me.
E-mail is: oplholik{#@}roadrunner.com Just correct the link.
Thanks all,
Paul
From time to time, I’ll put up some pics of what I’m working on, and maybe even do some to your specs as far as the sizes of the holes you need for your pv. The shapes of the caddy will be pretty standard, the woods used will vary occasionaly, with an occasional exotic wood when I find a piece that can be stabilized without cracking.
I want to keep prices reasonable, as I realize that our money also needs to be spent on the necessities of vaping.
If I make something specific to fit your pv as far as hole, or slot size, I will need accurate, diameter dimensions for a tube pv, batteries, ect., and width, and thickness dimensions for a box mod.
Prices will generally run in the $20.00 to $30.00 range, there will be some a little less, and some a little more.
Payment will be by PayPal, as goods. I invoice when the caddy is ready to ship.
The caddys do take some time to complete, so some patience is required as I cannot mass produce these.
If there are any questions, feel free to pm, or e-mail me.
E-mail is: oplholik{#@}roadrunner.com Just correct the link.
Thanks all,
Paul
Last edited:
Examples of caddy's I have made are here.
Completed Caddys pictures by oplholik - Photobucket
Thanks
Completed Caddys pictures by oplholik - Photobucket
Thanks
Hi Paul just wanted to tell you that my caddy got here and its perfect! I'll post some pics of it in use after xmas.
Steve
Steve
No problem. I have a design idea that will only work with round (so it will rotate), 
. Back to the drawing board.
. Back to the drawing board.
Nice idea. I have seen online, some mini lazy Susan platforms that would be nice.
No problem. I have a design idea that will only work with round (so it will rotate),
Welcome to the Caddy Shop.
I am a woodworking hobbyist, and after making a few caddy’s for myself to help keep my precious pv’s in order, I thought maybe some of you might like a chance to get something that is, hopefully, unique, and special, for your pv organization.
The shapes of the caddy will be pretty standard, the woods used will vary occasionally, with an occasional exotic wood when I find a piece that can be stabilized without cracking.
I want to keep prices reasonable, as I realize that our money also needs to be spent on the necessities of vaping.
If I make something specific to fit your pv as far as hole, or slot size, I will need accurate, diameter dimensions for a tube pv, batteries, ect., and width, and thickness dimensions for a box mod.
Prices will generally run in the $25.00 to $35.00 range, there will be some a little less, and some a little more.
Payment will be by PayPal, as goods. I invoice when the caddy is ready to ship.
Shipping will be Priority flat rate, small box or medium, depending on the size of the caddy.
The caddys do take some time to complete, so some patience is required, as I cannot mass produce these.
If there are any questions, feel free to pm, or e-mail me.
Pics of some I've done are here: Completed Caddys pictures by oplholik - Photobucket
E-mail is: oplholik{#@}roadrunner.com Just correct the link.
Thanking you for your interest,
Paul
I am a woodworking hobbyist, and after making a few caddy’s for myself to help keep my precious pv’s in order, I thought maybe some of you might like a chance to get something that is, hopefully, unique, and special, for your pv organization.
The shapes of the caddy will be pretty standard, the woods used will vary occasionally, with an occasional exotic wood when I find a piece that can be stabilized without cracking.
I want to keep prices reasonable, as I realize that our money also needs to be spent on the necessities of vaping.
If I make something specific to fit your pv as far as hole, or slot size, I will need accurate, diameter dimensions for a tube pv, batteries, ect., and width, and thickness dimensions for a box mod.
Prices will generally run in the $25.00 to $35.00 range, there will be some a little less, and some a little more.
Payment will be by PayPal, as goods. I invoice when the caddy is ready to ship.
Shipping will be Priority flat rate, small box or medium, depending on the size of the caddy.
The caddys do take some time to complete, so some patience is required, as I cannot mass produce these.
If there are any questions, feel free to pm, or e-mail me.
Pics of some I've done are here: Completed Caddys pictures by oplholik - Photobucket
E-mail is: oplholik{#@}roadrunner.com Just correct the link.
Thanking you for your interest,
Paul
I would like to wish all of you who are reading this thread, and past customers, a VERY MERRY XMAS. May it be filled with family, friends, and good will. Enjoy everyone!
- Status
Similar threads
- Locked
- Locked
- Locked
