Calling all AGA Pro's..

[.DoT.]

Running into a weird problem here. My coils are perfect. Wick is perfect. Oxidation is also perfect. Battery is new and at 4.1v so it is also perfect. But I'm not getting much flavor nor vapor? Coil is at 1.2 ohms and the jiuce is "bubbling" when I fire the device? Even if I take a "primer puff" I still can't get a nice vapor cloud or any TH.

I'm leaning towards it being a wicking issue? Maybe a juice issue? I've got Two Peas Strawberry Champagne 18mg in it, but there is no flavor?

Any thoughts on this would be great, I'm thinking about tearing down this set up and rolling a 500 solid wick everyone is raving about?

Thanks guys!

 

[Rule62]

Usually, when flavor and vapor are weak, the cause is a loose coil. The coil isn't making sufficient contact with the wick. If there are spaces between the coil wire and the wick, it will also cause the bubbling.

 

[payne1226]

i use a 400 solid wick with no oxidation i pluse and have found it to wick better

 

[.DoT.]

Alright! Rebuild time! Thanks for the help!

 

[Ink Stained]

Well not to sound like a smart a.... but if everything was perfect you wouldn't be posting here now would ya I joke, don't be mad LOL/
I usually get weak flavor and bubbling if my coil is either too loose or too tight. Too tight always ends up with bad hotspots though.
I never actually got the idea of making the coil and dropping the wick in thing, never worked out for me. I usually just wrap the coil around the wick and drop them in place and make sure my leads are pretty close to the same size. If it is your first time using the aga or a genesis all together, you will get it!
Anytime the juice bubbles it is getting too hot, not vaporizing, boiling. I would guess you are a bit too tight.

 

[Hello World]

I'm thinking about tearing down this set up and rolling a 500 solid wick everyone is raving about?

Do it !!!

You may have to tip though to allow lots of juice to accumulate around the wick/coil area.

Also a ~Zen style handwrap at 13:28 renders very good contact without any voids between the wire and the mesh.