Can someone recommend an easy flashlight mod?

[khawk77]

I'm really starting to get into modding as a hobby, but my knowledge/experience is very limited. I have recently built a nico stick, but I would like to build a flashlight mod and I've looked but can't seem to locate a good set of instructions. Anyone know of one?

 

[Connman]

madvapes is where I got my flashlight and all the parts to make this one.

http://i809.photobucket.com/albums/zz17/_Connman_/E-cig Mod Pictures/FlashlightMod.jpg?t=1266490508

Directions are posted here in a paint diagram. The body acts as the ground in it so you just need to ground the atty connection to the flashlight or the switch if its metal which is how I did mine.

http://www.e-cigarette-forum.com/fo...asic-wire-diagram-flashlight-mod-diagram.html

Hope this helps.

 

[ainako]

http://www.e-cigarette-forum.com/forum/battery-mods/54784-bulldog-laser-mod-easy-n-cheap.html

 

[Krythis]

Mini-mag mod

http://www.e-cigarette-forum.com/forum/modders-forum/3759-my-diy-dse901-magnum-power.html

Magnum_DIY.wmv

 

[caesar]

http://www.e-cigarette-forum.com/forum/battery-mods/54784-bulldog-laser-mod-easy-n-cheap.html

Very easy to build for anyone!

 

[damaged002]

I've been making these lately. Both are very easy. I call this one the Vapor-Grip It uses an 18650 and it rocks:

Here's the link to the post with instructions for building it:

http://www.e-cigarette-forum.com/forum/battery-mods/68417-new-flashlight-mod.html

NOTE: I changed it up a bit to fit the 18650. Let me know if you have any questions.

I bought this one on ebay. This one uses 2 protected RCR123As:

Here was the link:

Black 6V Xenon Tailcap Police Flashlight Torch w/CR123A - eBay Handheld Torches, Lamps, Torches, Camping, Hiking, Sport. (end time 27-Jan-10 22:46:44 AEDST)

 

[WillyB]

Madvapes is where I got my flashlight and all the parts to make this one.

http://i809.photobucket.com/albums/zz17/_Connman_/E-cig Mod Pictures/FlashlightMod.jpg?t=1266490508

Directions are posted here in a paint diagram. The body acts as the ground in it so you just need to ground the atty connection to the flashlight or the switch if its metal which is how I did mine.

http://www.e-cigarette-forum.com/fo...asic-wire-diagram-flashlight-mod-diagram.html

Hope this helps.

Luv your 'custom' nose piece.

 

[b00stzx3]

What happened to the Laser Mod? Its gone!

 

[four2109]

What happened to the Laser Mod? Its gone!

Start at the end of the thread and read backwards. There is a link to a PDF file with the pictures in it. Somewhere around post 225, 255...