Cartos & Atties For The GLV2 5-Volt Regulated

[cl8nc]

Hello vape Community: The wife and I are soon going to have our 1st mod (GLV2 5-Volt Reg.) with the 510 connection. Now we understand that this comes down to preference and of course most will work however we want your thoughts. What cartos (Reg, Low Rez, Duel, etc.) have you used on the GLV2 and/or Atties that you like? Also, any links to suppliers would be GREAT!! THANKS

 

[dormouse]

Cartos called LR are probably too low for 5v. They are LR for 3.7v. A standard res (around 3 ohms) carto or atty becomes LR on 5v (3 ohms is 2 less than 5)

 

[madjack]

...for that mod, you want either 1.5-2ohm dual coils or 3>ohm single coils....

p.s. the dual coils will give a really rich vape but, will go thru juice like water thru a firehose...these cartos really benefit from being in a carto-tank........mj

 

[BluSwatch]

I use cartos/clearos in the 2.5-3.0 ohm range on my GLV 5v, and lower (around 2 ohm) on my GLV 3.7v. The lower res stuff get way too hot for me (clearomizer even glows! LOL) on the 5v. (I wanted to clarify that)
I am a Boge carto or carto tank fan.

And congrats on your GLV!!!

Oh - I got the 3 packs deal of Boges at Spring Vapor
http://springvapor.com/pid-88/boge-cartomizer-3pack.html

 

[tj99959]

You can use anything you want on a GLV2, it will automatically adjust.

Here are the results of the test:

CISCO 1.5 306 1.22 OHM - 3.90V = 12.4 WATTS
CISCO 1.5 510 1.52 OHM - 4.24V = 11.8 WATTS
CISCO 2.0 510 1.96 OHM - 4.74V = 11.4 WATTS
BOGE/LX CARTO 2.87 OHM - 5.47V = 10.4 WATTS
SLB LR 901 1.87 OHM - 4.67V = 11.6 WATTS
??? LR 801 1.45 OHM - 4.17V = 11.99 WATTS
V4L COOLCART 3.31 OHM - 5.67V = 9.71 WATTS
V4L CARTO 2.29 OHM - 5.0V = 10.9 WATTS
MEGA CARTO 2.71 OHM - 5.27V = 10.25 WATTS

GLV2 atomizer testing under load - YouTube

 

[cl8nc]

Understanding LR and Reg Rez has been interesting. I have an eGo 3.7volt and locked in a few LR Atties from AltSmoke and they did not perform well. I understand this may be due to the eGo batteries and a 3.7 mod device with the larger batteris would fit that. We mainly use Cartos however dripping is enjoyed as well. You all have filled us in on some details and your time to do that is very much appreciated. Any additional links to cartos and atties people like would be amaze' and we cannot wait for GLV to drop our GLV2's in the ol'mail.

 

[Goldenkobold]

as tj99959 points out it isn't a huge deal on a GLV2 unless they changed its internals...it makes everything perfect (or imperfect depending on your desires)

 

[cl8nc]

Yes, his results were helpful (and amaze'). We want to get as close to 5-Volts as possible with good taste. I picked up the sale on Cartos from the poster above and now onto Atties! LF atties that rock around 5-Volts for the mod and we are set. For those of you posting on the thread and thanks again, what do you prefer, de-wicked and/or de-bridged or fresh out the package?

 

[Dan Patrick]

I always de-wick all my atties. I used to debridge but the bridge causes no real change IMO in the vape, and it prevents splatter. De-wicking makes it easier to change flavors, and keeps your atty tasting fresh.