CE2 Fluxomizer Completion (Drip Tip + New Mod)

[aktionze]

Hello everyone,

I am a big fan of Fluxomizer and have been enjoying it with my KR808 battery

However, I have been using the rubber mouthpiece that came with Fluxomizer package and I realized that I really would like to complete my "kit" and I will be much happier.

So I was looking at some drip tips from Gotvapes.com and I came down to either GotVapes Clear Color Swirl 510 Drip Tip - WHITE [gv-clearSWIRLY510driptip-WHITE] - $3.45 : GotVapes.com, E-cigarette Supplies - Atomizers Cartomizers Mods Juice and more or one of Coolstone drip tips. I was wondering if anyone could recommend which works better with CE2 Fluxomizers for KR808? Or recommend other drip tips that works very good.

Also, I came across a mod by glockman1000 from youtube (How to install the new GotVapes plug seal on your Fluxomizer Deluxe - YouTube). I was wondering if has anyone tried that? Also, I was wondering if that works better than "o-ring" mod and if that seal is from GotVapes VISON Extreme Mouthpiece & Inner Plug Set- REGULAR [gv-visionMOUTHPIECEPLUGset-REG] - $0.69 : GotVapes.com, E-cigarette Supplies - Atomizers Cartomizers Mods Juice and more Would this mod also work with one of those drip tips???

I am sorry for many questions and thank you for your help.

 

[zoiDman]

...

Also, I came across a mod by glockman1000 from youtube (How to install the new GotVapes plug seal on your Fluxomizer Deluxe - YouTube). I was wondering if has anyone tried that? ...

I have done this. It Works Great.

Not sure I would use My Provari to pull tubes off though. Use a Dead Battery if you have one. If not, Buy a 6 Dollar 510 Battery to pull on.

When you get tired of Fooling with the Cup Seal and the O-Ring, you might try the Mod that I do. I call it the OPMP mod (One Piece Mouth Piece Mod).

What I do is Cut the Length of the Tube down until it is about 1/8" longer than the Cup. Then I take a White Mouth Piece and cut a Small Cone on the Inside of it. The Mouth Piece Now becomes the Seal at the Cup.

Here a DWG of what I'm doing...

Works Great. And for those of use who want to keep the PV / CE2 as short as Possible, it fits the bill.

 

[Rule62]

I'm a big fan of the conversion plug seals, and I install them exactly as the video shows, except I don't use my Provari for pulling tubes off. I use an old "stick" battery.

 

[aktionze]

Thank you zoiDman and Rule62 for answering whenever I have questions.
OPMP mod and the mod from Youtube look very nice. For OPMP mod, I like the idea that it shortens the length. I guess I will have to try both and figure out which one work the best.

However, for conversion plug seals, do I need to buy Vision Extreme mouthpiece and inner plugs? If I do, do I need to buy regular, mini, or giant? Or can I possibly buy inner plug alone?

 

[burns_erin]

Thank you zoiDman and Rule62 for answering whenever I have questions.
OPMP mod and the mod from Youtube look very nice. For OPMP mod, I like the idea that it shortens the length. I guess I will have to try both and figure out which one work the best.

However, for conversion plug seals, do I need to buy Vision Extreme mouthpiece and inner plugs? If I do, do I need to buy regular, mini, or giant? Or can I possibly buy inner plug alone?

Based on my collection of plugs and seals, I do believe you need the micro or nano, and I'm not sure they have those for sale right now.

 

[zoiDman]

Thank you zoiDman and Rule62 for answering whenever I have questions.
OPMP mod and the mod from Youtube look very nice. For OPMP mod, I like the idea that it shortens the length. I guess I will have to try both and figure out which one work the best. ...

That's really the Key. Just finding what works for you and your e-Liquid/Hardware.

I sort of Laugh when I see a XL CE2 with a 1" long Drip Tip screw into a 18650 Provari. Darn thing is about a Foot Long.

Me, I want the Mod to be as Short as Possible.

That Goes for the CE2 also. And using the OPMP Mod is Basically Tooless, It's Win-Win. At Least for me.

 

[aktionze]

Hmmmm, I wanted to try at least once but it might be possible that I would get to try the mod. I wonder someone would clarify that but thank you for the information, burns_erin!!!

Based on my collection of plugs and seals, I do believe you need the micro or nano, and I'm not sure they have those for sale right now.

 

[aktionze]

zoiDman, actually I do agree that it is pretty long and I use Kr808 battery which makes it look like a long stick with CE2 and a drip tip.

That's really the Key. Just finding what works for you and your e-Liquid/Hardware.

I sort of Laugh when I see a XL CE2 with a 1" long Drip Tip screw into a 18650 Provari. Darn thing is about a Foot Long.

Me, I want the Mod to be as Short as Possible.

That Goes for the CE2 also. And using the OPMP Mod is Basically Tooless, It's Win-Win. At Least for me.

 

[Rule62]

That's really the Key. Just finding what works for you and your e-Liquid/Hardware.

I sort of Laugh when I see a XL CE2 with a 1" long Drip Tip screw into a 18650 Provari. Darn thing is about a Foot Long.

Me, I want the Mod to be as Short as Possible.



That Goes for the CE2 also. And using the OPMP Mod is Basically Tooless, It's Win-Win. At Least for me.

Yep, that's my usual set up; Provari, XL Fluxo, and a drip tip. Although I like the 18490 battery when I'm out and about. It's still a handful. What I also sorta laugh to myself at is those who use an 808 "stick" battery with a 3.5 ml tank.