CE4 Problems

Status
Not open for further replies.

Occultation

Full Member
Jan 30, 2014
39
0
UK
Hi,
Today and last night my ecig started being weird... I have a basic set up, eGo battery and a CE4. Basically my ecig keeps gargling after one vape. I've left it all morning and then lightly sucked the ce4 before screwing it on the battery, no problems. I cleaned the battery and the bottom of the ce4. When I screw it on and vape it starts to gurgle and leak! Any thoughts??

Sent from my XT1032 using Tapatalk
 

TheColdHandedVG

Super Member
ECF Veteran
Verified Member
May 30, 2013
591
624
New York, USA
Also, try taking the clearomizer off the battery and just blow into the mouth piece moderately hard while holding a paper towel under the bottom. Then wipe up any juice that comes out the bottom. You might have got some juice in center post that is just hanging out there and you just need to blow it our every now and then.
 

Stringplucker

Super Member
ECF Veteran
Verified Member
Mar 29, 2014
724
1,005
Tarentum, PA, USA
If it's clear before putting on the eGo, check the connection at the eGo. Use the corner of a paper towel to wick it away. When refilling, hold the tank at an angle and fill from the side of the opening, making sure that none goes down the center hole.

CE4 clearomizers are the Yugo of the e-cig world...cheap, some are duds, and they are disposable.

If you like that design, I would suggest going back and seeing if they have an iClear16. It looks the same, but you are able to replace the coil and wicks if needed, and can clean them out for a flavor change.

I have a handful of CE4 and CE5 clearos in a drawer that are basically useless. I give them to friends as they need one or two. When I first began, I was talked into buying them...I now want to kick the guy that suggested that in the shin with steel toe boots!

I don't even use them to try sample flavors that come in the mail...they mute the flavor so much and create much more hassle than they are worth...just my $0.02
 

Weizenheimer

Super Member
ECF Veteran
Verified Member
Oct 24, 2013
626
401
North Carolina
Sorry, phone auto corrected 'replace wicks'

Sent from my XT1032 using Tapatalk

If you are referring to the links i posted, you replace the coils by just unscrewing the old one and screwing in a new one. It isn't wrapping wires around wicks if that is what you meant.
 

djsvapour

ECF Guru
ECF Veteran
Oct 2, 2012
11,822
7,901
England and Wales
But the problem was the battery... Odd.

Not that odd. The success on these things depends on how easy you can draw on it. If the battery is playing up, you might suck all that juice in too hard.

Are you buying from a shop or online. If you look online, you can get iClear16s and Kanger evods or T3S for £3.49, they are both better and have replaceable coil heads.
 
Status
Not open for further replies.

Users who are viewing this thread