Charging the UltraFire XSL 18350 1200mAh 3.7v Battery

[DrBrabham]

Can anyone recommend what's the best charger for charging the UltraFire XSL 18350 1200mAh 3.7v battery?

I tried using my TrustFire TR-005 but the battery got crazy hot in less than 5 min. so I took it off.

I also have a TrustFire TR-003P4 but not sure if it works for the 18350

Any help would be greatly appreciated.

 

[Shel]

Can anyone recommend what's the best charger for charging the UltraFire XSL 18350 1200mAh 3.7v battery?

I tried using my TrustFire TR-005 but the battery got crazy hot in less than 5 min. so I took it off.

I also have a TrustFire TR-003P4 but not sure if it works for the 18350

Any help would be greatly appreciated.
View attachment 75926

I was actually just searching for 18350 batteries and for a charger for them.

I found this charger:

They have 'em at Battery Junction here....

Lemme know if you end up ordering it, and how well it works! They're $14.95 for the charger.

Good luck!

 

[DrBrabham]

I saw this charger before but was not familiar with the name brand (TL) but it looks to be a good quality charger. I'll let you know if I purchase it how well it works. Thanks

I was actually just searching for 18350 batteries and for a charger for them.

I found this charger:

They have 'em at Battery Junction here....

Lemme know if you end up ordering it, and how well it works! They're $14.95 for the charger.

Good luck!

 

[WillyB]

Can anyone recommend what's the best charger for charging the UltraFire XSL 18350 1200mAh 3.7v battery?

I tried using my TrustFire TR-005 but the battery got crazy hot in less than 5 min. so I took it off.

I also have a TrustFire TR-003P4 but not sure if it works for the 18350

The TR-005 is made for large cells, the stated out-put of 1.5A is quite high, hence the over heating. Your TR-003P4 has a 1/2A (500mA) rate (check the label on the bottom) and should work just fine.

 

[Switched]

Can anyone recommend what's the best charger for charging the UltraFire XSL 18350 1200mAh 3.7v battery?

I tried using my TrustFire TR-005 but the battery got crazy hot in less than 5 min. so I took it off.

I also have a TrustFire TR-003P4 but not sure if it works for the 18350

Any help would be greatly appreciated.
View attachment 75926

As Willy pointed out the charger is too powerful for the batt. The 1200mAh batt is capable of a max charge and discharge of 1.2A, whilst your charger is putting out 1.5A. The battery simply cannot accept that high a charging rate. It would be like trying to push a golf ball up a garden hose. When charging batts the rule of thumb is to use a setting (on adjustable ones) to below the mAh rating of the battery. e.g a 500ma or 0.5A will do just fine, besides the slower the charge, the better the charge, and the better the life out of the charge and battery as a whole. Hope this helps.

 

[WillyB]

And FWIW, if it matters, those are unprotected cells.

 

[skipdashu]

I also have a TrustFire TR-003P4 but not sure if it works for the 18350

Any help would be greatly appreciated.

I charge the blue protected ultrafire 18350s and AW IMR 18350s and no-name IMR 18350s in TR-003P4.

 

[skipdashu]

I was actually just searching for 18350 batteries and for a charger for them.

I found this charger:

They have 'em at Battery Junction here....

Lemme know if you end up ordering it, and how well it works! They're $14.95 for the charger.

Good luck!

That's a 350mA charger = slow. TR-003P4 will be faster.

 

[skipdashu]

BTW your TR-005 should charge IMR 18350s ok as max rate on the IMRs is usually 1500ma but not the Li-Ions. Again though, The TR-003P4 will charge any of the 18350s (except LiFePO4s, which I've never seen in this size but just in case).