Chip list

Status
Not open for further replies.

Uncletattoowhat

Ultra Member
ECF Veteran
Verified Member
Apr 21, 2014
1,116
1,294
Poquoson, VA
How did you wire it? Do you have a diagram?

I used part number IAF12020A007V-007-R.

Here's a quick PowerPoint schematic I made at home and used to wire mine. (it’s similar to the OKL diagram, so any master switches, fuses, caps should be similar).
TDKLambda20A.jpg


Here's a few pics of the box I did it all in. They're not the best, it's what I had at 2am when I finished it. The inside isn’t the cleanest as some of the wires were placed while diagnosing a firing problem I had and the chip is buried underneath everything. I wish I had waited longer before working on it after painting it to give it time to cure, as you can see the brown primer under some of the paint lol. I'm also upset that the slide switch i used was too long to fit in the hole I cut above the voltage meter, even after snipping the legs down to the base. And, the voltage meter is a 0.36" I had laying around, so next time I really want to use a smaller one. It just looks too cramped for my taste. No pics of the chip wiring either. If I do another one, I have things I want to do differently and will try to do some step by step pictures.
IMG_4502.jpg

IMG_4501.jpg

IMG_4504.jpg
 
Status
Not open for further replies.

Users who are viewing this thread