Clearo for Kanger Evod C?

[smilelee]

Hi, just wondering what are the most compatible clearos for the Kanger Evod-C 650mAh battery? "This is generally a 3.7v battery at various mahs but when fully charged usually comes in around 4.1-4.2v"- from the gotvapes website

I've been using the Kanger T3S clearos with the 2.2ohm coil heads. is that correct?

 

[yiddleboge6]

Hi, just wondering what are the most compatible clearos for the Kanger Evod-C 650mAh battery? "This is generally a 3.7v battery at various mahs but when fully charged usually comes in around 4.1-4.2v"- from the gotvapes website

I've been using the Kanger T3S clearos with the 2.2ohm coil heads. is that correct?

from the site....
"Compatible with all or most eGo cones and eGo clearomizers and tanks."

since it has eGo threading...you can use just about any carto or clearmizer you'd like to...ego threaded or 510

 

[rdsok]

And in addition to what Yiddle's said...

... you select the ohms of your preference... there isn't a right or wrong one, just the one you like most

 

[autobiogphnation]

I'd personally recommend using something with around 2.4ohms unless you want a warmer vape. I use 2.4ohms on 3.7volts, a lot of friends do the same as well, not too warm but not too cool either.

Sent from my Nexus 7 using Tapatalk

 

[rdsok]

I'd personally recommend using something with around 2.4ohms unless you want a warmer vape. I use 2.4ohms on 3.7volts, a lot of friends do the same as well, not too warm but not too cool either.

Sent from my Nexus 7 using Tapatalk

I'm not knocking the suggestion... but it's your preference and I know of too many vaper's each whom have their own also. In fact, depending on the e-liquid... I'll vape them between 6w-9w and I pick which by the flavor that is produced.

 

[autobiogphnation]

I'm not knocking the suggestion... but it's your preference and I know of too many vaper's each whom have their own also. In fact, depending on the e-liquid... I'll vape them between 6w-9w and I pick which by the flavor that is produced.

Agreed, it'll vary for everyone especially based on flavor intensity. I just use a ego-c so I'm fixed at 3.7v so the 2.4ohms work well overall for that imo, obviously some exceptions for darker, more intense flavors. But in the end, to each its own.

Sent from my Nexus 7 using Tapatalk

 

[pufZeppelin]

Hi, just wondering what are the most compatible clearos for the Kanger Evod-C 650mAh battery?
This is generally a 3.7v battery at various mahs but when fully charged usually comes in around 4.1-4.2v"- from the gotvapes website
I've been using the Kanger T3S clearos with the 2.2ohm coil heads. is that correct?

pretty sure that the - Kanger Evod-C 650mAh - is a newer release style battery

it has a regulated set output of 3.8v and the party trick (new) is
the ego battery has a changeable head (threaded part)

it is not VV, is it ?

using the T3S with the 2.2Ω coil should work great

 

[yiddleboge6]

pretty sure that the - Kanger Evod-C 650mAh - is a newer release style battery

it has a regulated set output of 3.8v and the party trick (new) is
the ego battery has a changeable head (threaded part)

it is not VV, is it ?

using the T3S with the 2.2Ω coil should work great

Nope....not vv...

Kanger EVOD-C Changeable Size Batteries and Control Head [gv-KangerEVOD-C-Changeable] - $0.00 : GotVapes.com, E-cigarette Supplies - Atomizers Cartomizers Mods Juice and more