Clearomizer, Types/Brands, etc...what's best?

[Mohamed]

Can anyone suggest a good clearomizer. Preferable from fasttech (not worried about the wait). I'm not real sure what the difference is between the top feed ones and the bottom feed ones...other than where the coil resides. I had one MCC Pro bottom feeder (I think). That one reduced the leakage as opposed to the small disposable tanks that come with the ego-c.

I'd like to be able to buy 2-3 and then buy 5-10 spare atomizers with it as well. So mainly looking for something that is compatible with my ego battery, reduces leakage or no leaks, and I can replace the atomizers. Also from what I can gather My range of ohms should be 1.8-2.8. I have some LR and Normal that came with ego starter...not sure what the ohms are...but LR ones don't seem to last long and give hot burnt flavor after short usage.

I'm overwhelmed with all the choices and figured you guys/gals would know best.

Ohh I do have Vamo V3 that will be in the same order so not sure if ohm difference changes with those.

 

[Asbestos4004]

Look into the Aspire line. PBusardo did a recent review and had nothing but good things to say. For him to rave about a Clearo says something. All different types from the Vivi to the Starlight sizes. Apparently they're fantastic. A little more expensive but it seems you get what you pay for. Probably not on Fast Tech though.

 

[Mohamed]

Look into the Aspire line. PBusardo did a recent review and had nothing but good things to say. For him to rave about a Clearo says something. All different types from the Vivi to the Starlight sizes. Apparently they're fantastic. A little more expensive but it seems you get what you pay for. Probably not on Fast Tech though.

Didn't see the Aspire or Starlight but saw a few Vivi's on FastTech. Seems like a couple of them come 2 heads but couldn't find the heads (which I assume is the atomizer) to be purchased separately.

 

[Zevyn]

Maybe check out the T4's there on FT. They use EVOD heads and are basically similar to the EVOD only they hold more ejuice. They have more of a T2 tank though. Clear with mL markings.

I got two packs of the 6x T4's there (about $23 or roughly 3$ and change each) for myself and my wife, and they are tainted by machine oil. I had to boil the heads and then I did a soak in Everclear for good measure with a final rinse in the sink. They seem to be alright, except I've read that the stock heads are garbage and they should be replaced almost out of the box. I haven't used but one and it vapes just fine. Metal drip tips, too.

I do notice a slight difference in the draw for each one, but they are all empty and haven't been loaded yet. The airy-ness between each one slightly varies. They use two air holes on the base as opposed to the EVOD that has 3 (some EVOD clones use 2 though).

You get what you pay for. My EVOD's seem to be higher quality in terms of manufacturing, but these are pretty good for the price.

 

[Mohamed]

Maybe check out the T4's there on FT. They use EVOD heads and are basically similar to the EVOD only they hold more ejuice. They have more of a T2 tank though. Clear with mL markings.

I got two packs of the 6x T4's there (about $23 or roughly 3$ and change each) for myself and my wife, and they are tainted by machine oil.

Don't like the sounds of machine oil being in them...What's the difference between T2, T3, and T4. Is it different versions like T4 is the latest and greatest of those types?

My EVOD's seem to be higher quality in terms of manufacturing, but these are pretty good for the price.

I was looking at the EVOD's and I don't quite know what it means by "cone threaded and NOT 510 threaded"

The EVOD is eGo cone threaded and NOT 510 threaded. This clearomizer fastens onto the outer cone threads of an eGo battery.

Does the standard ego-c starter kit come with a cone?

This basically my setup

Anyway just wondering if the EVOD's will work with the batteries I currently have or do I have to buy some type of cone adapter?

UPDATE: Ughh I guess I do need an adapter to work with the EVOD's. I didn't see any of those on FastTech either. Trying to avoid shipping and handling from somewhere else as I got most of my order ready to go except for the clearomizer/tank stuff/atomizer stuff.

 

[Bibliophile713]

Evods and T4s will work on an eGo style battery. I have both from Fasttech; the same replacement coil heads (available in 1.8 or 2.5 ohms) will work in both the Evod and the T4. I have only bought the 2.5 heads and have been pleased with them. I've only been using the T4s for about a week, but they vape really well so far.

 

[Ref Minor]

Evod, Protank and mini Protank clones all take the same replacement heads and are decent quality.

 

[v1k1ng1001]

I'm using the protanks and protank minis. I like bottom feeding and hate plastic.

 

[Mohamed]

Evods and T4s will work on an eGo style battery. I have both from Fasttech; the same replacement coil heads (available in 1.8 or 2.5 ohms) will work in both the Evod and the T4. I have only bought the 2.5 heads and have been pleased with them. I've only been using the T4s for about a week, but they vape really well so far.

I assume you bought the cone adapter to get your EVOD's to work on the eGo style battery?