Clone Recipes
- Thread starter alchemix
- Start date
- th_trl_thread_readers 0
- Status
I have a few recipes on the internet.
Red_Bird here
NoTarZ at NuVapor
The only clones I make are ejuices that sounded good to me. The rest are my originals.
"Cloud F'9" (monkeycream clone.....a creamy dreamy butterscotch vape)
"Ectospasm" (my ectoplasma clone)
"Remedy Black" (my first Pluid clone, was a bit heavy on black licorice)
"Good N Plenty" (5.5/5.5/5.5) .....an updated more realistic reproduction of Pluid, minus the food color
Use Google......I was nice enough to type them all out once and share them for free. You can do the legwork.
Red_Bird here
NoTarZ at NuVapor
The only clones I make are ejuices that sounded good to me. The rest are my originals.
"Cloud F'9" (monkeycream clone.....a creamy dreamy butterscotch vape)
"Ectospasm" (my ectoplasma clone)
"Remedy Black" (my first Pluid clone, was a bit heavy on black licorice)
"Good N Plenty" (5.5/5.5/5.5) .....an updated more realistic reproduction of Pluid, minus the food color
Use Google......I was nice enough to type them all out once and share them for free. You can do the legwork.
I don't think they qualify as clones unless you've vaped the original and make an indistinguishable juice.
here are reds recipes. sorry for the crap recipes. I mean crap format.
Spinning Backfist
5% TFA Juicy Peach
5% FA Pineapple
5% FA Papaya
3% FA Fresh Cream
TFA= The Flavor Apprentice
FA= Flavour Arts
Stir + Mix (shake) well....Let this one steep at least 3 days, capped.
================================================================================
Good N Plenty Recipe, 5.5/5.5/5.5
I typically make/vape 60/40 or 50/50 blends. These percentages should work for either:
5.5% TFA horehound
5.5% TFA absinthe
5.5% FW (flavor west) ECTO COOLER
Very similar to a Good N Plenty candy. No em or EZ Sweetz is needed...
It may crack plastic, not sure. Been vaping it in a Kanger Pro Tank.
(made this batch 60/40, 16 mg, its pretty dang good)
================================================================================
Percentages below were used in the creation of an eliquid in a 60/40 mix. If you use MORE VG then 40% you may need to slightly increase the flavoring %.
12% Capella "Root Beer"
2% Vaping Zone "Vanilla Ice Cream"
0.4% Capella "Vanilla Custard"
This stuff is tasty 24 hours after making it. I imagine it will only get a bit better. Hope you enjoy it as much as I do.
================================================================================
ECTOSPASM (ectoplasma clone)
6% TFA Hawaiian Punch
6% Flavor West "Ecto Cooler"
1% TFA "Smooth"
Enjoy this clone, I sold this recipe not long ago. Never said I wouldn't post it. Here it is.
====================================================================================
French NogELLA
Capella 9% Egg Nog
Capella 5% French Toast
Capella 1% Hot Cinnamon Candy
Hope somebody else enjoys it.
Spinning Backfist
5% TFA Juicy Peach
5% FA Pineapple
5% FA Papaya
3% FA Fresh Cream
TFA= The Flavor Apprentice
FA= Flavour Arts
Stir + Mix (shake) well....Let this one steep at least 3 days, capped.
================================================================================
Good N Plenty Recipe, 5.5/5.5/5.5
I typically make/vape 60/40 or 50/50 blends. These percentages should work for either:
5.5% TFA horehound
5.5% TFA absinthe
5.5% FW (flavor west) ECTO COOLER
Very similar to a Good N Plenty candy. No em or EZ Sweetz is needed...
It may crack plastic, not sure. Been vaping it in a Kanger Pro Tank.
(made this batch 60/40, 16 mg, its pretty dang good)
================================================================================
Percentages below were used in the creation of an eliquid in a 60/40 mix. If you use MORE VG then 40% you may need to slightly increase the flavoring %.
12% Capella "Root Beer"
2% Vaping Zone "Vanilla Ice Cream"
0.4% Capella "Vanilla Custard"
This stuff is tasty 24 hours after making it. I imagine it will only get a bit better. Hope you enjoy it as much as I do.
================================================================================
ECTOSPASM (ectoplasma clone)
6% TFA Hawaiian Punch
6% Flavor West "Ecto Cooler"
1% TFA "Smooth"
Enjoy this clone, I sold this recipe not long ago. Never said I wouldn't post it. Here it is.
====================================================================================
French NogELLA
Capella 9% Egg Nog
Capella 5% French Toast
Capella 1% Hot Cinnamon Candy
Hope somebody else enjoys it.
Last edited:
Don't be a hater, be a creator. I have lots of recipes, and only 4 clones. I'd rather make my own.
I can improve any given recipe.
Last edited:
I cant create a recipe so far. And Im interested in clone recipes. You are good at that job so i asked you to write your recipes in the thread. You can just say 'you can write them in your thread, its not a problem'. Instead of that, you insulted me.
And you have enough time to post in this thread but you dont have enough time to write your clone recipes in this thread, am i understand correctly?
(And if my English was good enough, i can explain myself better. Sorry)
And you have enough time to post in this thread but you dont have enough time to write your clone recipes in this thread, am i understand correctly?
(And if my English was good enough, i can explain myself better. Sorry)
Last edited by a moderator:
Crap recipes? I don't see you posting any, lol. You only missed 6 at Nu Vapor.
Its easier to criticize then to create and publicize, eh?
From this point forward my new recipes will be given to friends via pm or email....No more public recipes, some people are not worthy of my time and efforts.
Last edited:
All the trial and error and wasted money that it takes to make a receipe for these guys I dont think asking people to use google isnt such an insult. Im sure red bird put his time in posting his receipes at one point and shouldnt have to post it over and over for people who want receipes all in one place.
I am grateful for him because of his hard work, really. But i just want to gather all clone recipes in one thread.
If i do something wrong, im really sorry for that. Maybe i understood things uncorretly.
I tought 'quit beeing a jerk' was a insult. Maybe im wrong because i dont really know English as you understand.
Again, im really sorry if i do someting wrong.
I already searched and learned his recipes. I think i cant explain myself, sorry.
I don't think the OP was out of line. S/He was upfront in title and post. If you don't want to join in on the discussion per the OP's request, you can just move along to the next post. No harm done.
Legend 10 mls @ 10mg Nic 50/50
1 ml 10% 80/20 100 mg Nic
3.48 mls 34.8% PG
4.08 mls 40.6% VG
0.35 ml 3.5% 7 Leaves ( FA )
0.25 ml 2.5% French Pipe ( EcX S )
0.40 ml 4% Graham Cracker ( TFA )
0.2 ml 2% EM
0.04 ml 1% TA
0.20 ml 2% ACV
1 ml 10% 80/20 100 mg Nic
3.48 mls 34.8% PG
4.08 mls 40.6% VG
0.35 ml 3.5% 7 Leaves ( FA )
0.25 ml 2.5% French Pipe ( EcX S )
0.40 ml 4% Graham Cracker ( TFA )
0.2 ml 2% EM
0.04 ml 1% TA
0.20 ml 2% ACV
Thanks a lot for both recipe and other post but i think i do something wrong. Also i apologised to Red_Bird, i think there is no problem anymore.
Again thanks him for his recipes. And everyone who created a good clone.
Boomer may i ask where is that recipe came from? That seems very complex to me
The recipe is through comparison and experimenting. It's not complex if you type it into the ejuice calculator. I have shown both amount and percentages. All you need do is change the formula to your favored PG/VG Nic amount and/or experiment further. You can add Butterscotch or anything else you like.
alchemix, when you post an original thread, and it follows Forum rules, then your in charge. I fail to see where you went wrong. I understood your post and acted accordingly.
alchemix, when you post an original thread, and it follows Forum rules, then your in charge. I fail to see where you went wrong. I understood your post and acted accordingly.
Thanks a lot for both recipe and other post but i think i do something wrong. Also i apologised to Red_Bird, i think there is no problem anymore.
Again thanks him for his recipes. And everyone who created a good clone.
Boomer may i ask where is that recipe came from? That seems very complex to me
Boomer i cant explain where i went wrong because my English isn enough for it(really, i just cant make the sentences). But i can say i was so persistent about writining down the recipes(i sent him a pm for it also). I just shouldn't do that. But as i said, its not a big problem.
Also when i see your recipe first, i think there is so much number, but im looking at it now and it's not that complex as you said I will try it, thanks.
Also when i see your recipe first, i think there is so much number, but im looking at it now and it's not that complex as you said
I will try it, thanks.
I am going to apologize in advance for what I am about to say, but, man, It's got to be said.
DISCLAIMER
And you can take this a a general "Thread comment" not an "individual slam" about anyone in particular. Lets see what other disclaimers I need here:
No Offense is intended toward any individual and please lets all just get along because we should just not get offended and this is about the post not anybody individual, yadda yadda yadda
Lets all hold hands and sing Coom-By-Ya and meditate on peace
DISCLAIMER
Uh, hm. That's it I guess. Now, here:
Wow. Guy comes along with an inquiry and gets slammed for "being a bother" and then told to just Google it.
Real nice, guys.
Excuse us, the rest of the world, we lowly mere peons who are so "unworthy" of your "high achievements".
Give me a break.
What is this unwarranted negative attitude (that some have) which I've noticed in forums around the web; where newbies are told to just" read read read" or take a hike?
Have any of you done a search lately in these large forums? You end up with 10,000 irrelevant threads because of a "tag word". Yes it's a design deficiency in the forum programming,but perhaps some have "ascended to such heights (at least in their own minds) " that they can't see down.
You all were new once, too. Every single one of us were at some point. For all you know the OP could be an astrophysicist or Nobel laureate, and some of you are touting your own praises and berating the OP as a lazy "know-nothing" who just needs to Google it.
He is obviously proficient in more than one language. Which does NOT indicate laziness.
Where is your spirit of kindness, decency or just being a "human being" to another "human being" trying to learn?
Any of the self-styled "eJuice recipe Demi-Gods" speak more than one language even semi-fluently? Why don't YOU try to Google something in a language that is not your own.
How do you justify such a sour attitude toward a guy who has gone out of his way to respectfully inquire about your recipes? A respect that, based on your (now edited) replies is undeserved by you.
Pride goeth before a fall.
This kind of meanness to new people makes me sick! How is any of this justified?
Alchemix,
You are welcome here Your English is fine, and good enough to communicate so that we can understand. Like I said, we were all brand new, "Vape on ".
With respect to your initial post, I am told that Hangsen's flavors are pretty close to Halo's, if not exact. Hangsen 555 is very similar to Halo Prime 15. Use one drop of flavoring per mil. of base. Hangsen flue cured for a taste similar to Tribeca.
Hangsen Congress is similar to Smooth or Torque56 (both Halo), I was told.
TPA Asian RY4 at about 10% is very close to Torque56. I think it's just a matter of testing what you like.
It's really difficult to "clone", per se, because individual opinions of taste vary so much.And even those can ebb and flow. For instance, some of the flavors I was vaping a few months ago taste different now, though the formula is style the same.
I will see what I can come up with and either post them or PM them to you.
Cheers
DISCLAIMER
And you can take this a a general "Thread comment" not an "individual slam" about anyone in particular. Lets see what other disclaimers I need here:
No Offense is intended toward any individual and please lets all just get along because we should just not get offended and this is about the post not anybody individual, yadda yadda yadda
Lets all hold hands and sing Coom-By-Ya and meditate on peace
DISCLAIMER
Uh, hm. That's it I guess. Now, here:
Wow. Guy comes along with an inquiry and gets slammed for "being a bother" and then told to just Google it.
Real nice, guys.
Excuse us, the rest of the world, we lowly mere peons who are so "unworthy" of your "high achievements".
Give me a break.
What is this unwarranted negative attitude (that some have) which I've noticed in forums around the web; where newbies are told to just" read read read" or take a hike?
Have any of you done a search lately in these large forums? You end up with 10,000 irrelevant threads because of a "tag word". Yes it's a design deficiency in the forum programming,but perhaps some have "ascended to such heights (at least in their own minds) " that they can't see down.
You all were new once, too. Every single one of us were at some point. For all you know the OP could be an astrophysicist or Nobel laureate, and some of you are touting your own praises and berating the OP as a lazy "know-nothing" who just needs to Google it.
He is obviously proficient in more than one language. Which does NOT indicate laziness.
Where is your spirit of kindness, decency or just being a "human being" to another "human being" trying to learn?
Any of the self-styled "eJuice recipe Demi-Gods" speak more than one language even semi-fluently? Why don't YOU try to Google something in a language that is not your own.
How do you justify such a sour attitude toward a guy who has gone out of his way to respectfully inquire about your recipes? A respect that, based on your (now edited) replies is undeserved by you.
Pride goeth before a fall.
This kind of meanness to new people makes me sick! How is any of this justified?
Alchemix,
You are welcome here
Your English is fine, and good enough to communicate so that we can understand. Like I said, we were all brand new, "Vape on ".With respect to your initial post, I am told that Hangsen's flavors are pretty close to Halo's, if not exact. Hangsen 555 is very similar to Halo Prime 15. Use one drop of flavoring per mil. of base. Hangsen flue cured for a taste similar to Tribeca.
Hangsen Congress is similar to Smooth or Torque56 (both Halo), I was told.
TPA Asian RY4 at about 10% is very close to Torque56. I think it's just a matter of testing what you like.
It's really difficult to "clone", per se, because individual opinions of taste vary so much.And even those can ebb and flow. For instance, some of the flavors I was vaping a few months ago taste different now, though the formula is style the same.
I will see what I can come up with and either post them or PM them to you.
Cheers
Oh, here's where you can get the DIY Hangsen flavors:
- E Cig : Best Ejuice | Joye eGo & eGo-T | Boge Leo | Cartomizers | E-Liquid | Electronic Cigarettes
- E Cig : Best Ejuice | Joye eGo & eGo-T | Boge Leo | Cartomizers | E-Liquid | Electronic Cigarettes
I am not posting FREE recipes anymore. I've done my share. I have 11 or 12 recipes online.
Let these other guys have a chance to post theirs.
Let these other guys have a chance to post theirs.
Last edited:
- Status
Similar threads
