Cloud blowing builds

[Tom Forde]

This is all 30g, but you could do a 10 strand 32g cat track with a 32g wrap.HUGE clouds, just make sure it's on a parallel box.

 

[Hans Wermhat]

That's purdy!

 

[OhmzRaw]

View attachment 511183This is all 30g, but you could do a 10 strand 32g cat track with a 32g wrap.HUGE clouds, just make sure it's on a parallel box.

So for this I use 10 stands of 32g side by side as a core and wrap 32g over it?

 

[HighPlainsPuffer]

for a simple fused Clapton with what you have, wrap two straightened strands of 26 with your 32, i'm a big fan of the fused Clapton for clouds, flavor and ease!



2x26/32

 

[OhmzRaw]

for a simple fused Clapton with what you have, wrap two straightened strands of 26 with your 32, i'm a big fan of the fused Clapton for clouds, flavor and ease!



2x26/32

You think it'll be better if I dragon wrap it around the smallest ID and wick it like the dragon coils?

 

[HighPlainsPuffer]

You think it'll be better if I dragon wrap it around the smallest ID and wick it like the dragon coils?

Nano dragons are pretty neat for clouds, I just prefer simpler. I tried some macro dragons a while back and I just kept choking on the vape, way to much for me. The nano's are neat, give them a whirl! Twisted is my typical go to, many times in parallel configuration, but claptons have their place too!






Edit: 28/32, 28

 

[thekill]

I'd say make dual fused Claptons using the 26g and 32g

 

[OhmzRaw]

@Hans_Wermhat @HighPlainsPuffer What do you guys think of a staged heating coil, 24g parallel 32g (5 wraps 24g and 4 wraps 32g) ?

 

[Hans Wermhat]

Never tried them. I like for my coils to heat evenly.

 

[HighPlainsPuffer]

@Hans_Wermhat @HighPlainsPuffer What do you guys think of a staged heating coil, 24g parallel 32g (5 wraps 24g and 4 wraps 32g) ?

I love staged parallel coils, but the 32 and 24 have very different needs, I would look at using wire closer together, like 3 twisted strands of 32 in parallel with a 24. The 32 will heat very quickly by itself, and the 24will still be ramping up as the 32 is totally heated up. Twisting the strands will act as a slightly thicker wire, heating a bit slower, but still quicker than the 24.

For a basic parallel, a 28/24 parallel would work well, I used to use a lot of two strands 28 twisted in parallel with a strand of 24 with good results. My favorite wire for rda's at this point is 2x30 twisted and than twisted with a piece of 26, and my favorite rta wire so far is 2 twisted 30 than twisted with a piece of 28.

 

[OhmzRaw]

I love staged parallel coils, but the 32 and 24 have very different needs, I would look at using wire closer together, like 3 twisted strands of 32 in parallel with a 24. The 32 will heat very quickly by itself, and the 24will still be ramping up as the 32 is totally heated up. Twisting the strands will act as a slightly thicker wire, heating a bit slower, but still quicker than the 24.

For a basic parallel, a 28/24 parallel would work well, I used to use a lot of two strands 28 twisted in parallel with a strand of 24 with good results. My favorite wire for rda's at this point is 2x30 twisted and than twisted with a piece of 26, and my favorite rta wire so far is 2 twisted 30 than twisted with a piece of 28.

If its possible, can you please post a picture of your build [emoji4]

 

[HighPlainsPuffer]

If its possible, can you please post a picture of your build [emoji4]

Sure, be happy to!

Here's a 2x32 twisted, twisted with 28, paralleled with a 26:


And here is the coil in question, I played with it a bit this afternoon, 28/24 parallel. With the 24 being relatively low in resistance, this is 10 wraps coming out at .26


It's not bad! I like twisted combos because I think they give better flavor than a standard round wire, but this one does blow some clouds, I'm running it at 70 watts (about 4 volts). At 80 the clouds are pretty dense, and I'm not going any higher cause I'm a bit lightheaded already