#CloudChasing Kit from Vape Happy is in the mail

[Beto]

so my order FINALLY SHIPPED!
PACKAGE INCLUDES:
- (2) Sony 3.7V 2100mAh US18650VTC4 High Drain Li-ion Battery
- (1) NITECORE i2 Intellicharger
- (1) Includes XL Nimbus Clone (dual airholes)
- (10ft) Kanthal Resistance Wire
- (5ft) 3mm Silica Wick
- (1) Kamry K101 Mechanical mod


The only difference i saw between the Kamry k100 and the k101 was the color design difference... is that correct? So its finally shipped i should have it by Friday...im hoping. Does anybody recommend a specific coil build? Not too crazy like the hurricane or stove builds hahaha. Will organic cotton work from walgreens? is there a specific brand? i have 100% cotton yarn which i use on my protank 2.

I also have to get one of those ohms meter thingies since i will be building my own coils... yeah i dont have one and here i am doing coil wraps on my protank2...

OH YEAH WHICH GAUGE IS BETTER FOR IT? I HAVE A 28G KANTHAL A1 AND THE PACKAGE IS COMING WITH A 30G KANTHAL A1.


Thanks in advance

 

[Jimi D.]

One very important thing that's not in the kit. A multimeter !

 

[Inchspinner]

Beto 24g kanthal 7 wraps on 1/52 bit..... .5-.7 ohms 100% vg cloud chasing!!

 

[Beto]

One very important thing that's not in the kit. A multimeter !

thats what i plan on getting asap.

 

[Beto]

Beto 24g kanthal 7 wraps on 1/52 bit..... .5-.7 ohms 100% vg cloud chasing!!

that sounds interesting! thanks!

 

[Koudotai]

Can start out with simple single or dual coil builds then branch out into more interesting stuff I like the nano dragon coil. Watch the video by RipTrippers on YouTube. I use 26g kanthal wrapped on a paper clip. 10 wraps comes out to about .3. But before sub-ohming I hope you've learned about battery safety and ohm's law.


Sent via Telepathic Brain Waves

 

[DasBluCig]

Beto.....
I'd include a SECOND VTC4 battery....Always good to have back-ups!!
Also....Agree with getting a DMM.....if you're building coils, it's an absolute MUST, IMHO......
Good Luck!
VAPE SAFE!!
Happy (vaping) Trails!

 

[VJaysCustomCoils]

Yes, you MUST have a multimeter, or at the very least, a 510 connection resistance tester for ANY mechanical mod you will be using, until you are 100% confident in you coil making skills, and know without a doubt and without testing them, what resistance your coils are coming out to! Great to see cloud chasing is still far from dead!