I was vaping it in aerotanks and loved it but now I have made the leap to dripping. Can't seem to mimic the flavor I was getting but want the clouds. Help!
CLS. Tell me how you enjoy it. At what ohm, sc/dc, silica, cotton etc. Power etc.
- Thread starter PoofImGone
- Start date
- th_trl_thread_readers 0
- Status
What set up are you using?
I would also like assistance on this. For me I tried the whole micro/nano sub-ohm thing and it really covered up the complexity of the flavors, The Virus particularly. Best thing I've found is to wrap a 1.2 coil and space out the coils vaping at 15 watts. Double coils are good too, but I haven't done one in a few weeks.
For fruit flavors that I want to pop, like watermelon I will still do a micro and crank it.
I haven't been able to find a way to get massive taste without it covering up the complexity of the juice, every time I try, using The Virus as an example, the caramel smacks me in the face.
I would also like assistance on this. For me I tried the whole micro/nano sub-ohm thing and it really covered up the complexity of the flavors, The Virus particularly. Best thing I've found is to wrap a 1.2 coil and space out the coils vaping at 15 watts. Double coils are good too, but I haven't done one in a few weeks.
For fruit flavors that I want to pop, like watermelon I will still do a micro and crank it.
I haven't been able to find a way to get massive taste without it covering up the complexity of the juice, every time I try, using The Virus as an example, the caramel smacks me in the face.
I'm currently only using a igo-w. The rest of my rda's are in transit. I tried single coil @. 9 ohm and then dc @.5ohm. Always with cotton. On my first build i tried the grapw ape and it was GREAT. BUT then i tried virus and it didn't taste right then the cls and same feeling. Dont know what I'm missing
I really like GCD and Fruits in at around 0.9 on an Igo W4. That's my go to for GCD as I can't get the cinnamon to pop using a Reo.
The other Nicotickets, like I said I use 1.2 - 1.5 with the coils spaced out. It helps me taste some of the subtleties. It still chucks out 2x as much flavor and vapor compared to my Evods, but the flavor is more complex than with anything sub-ohm or micro, for me.
The other Nicotickets, like I said I use 1.2 - 1.5 with the coils spaced out. It helps me taste some of the subtleties. It still chucks out 2x as much flavor and vapor compared to my Evods, but the flavor is more complex than with anything sub-ohm or micro, for me.
I've been experimenting with Macro coils and getting decent results with dual coil drippers... I use the Brass Monkee, but, could easily be done with the Igo-W.
4-5Wraps of 26gu Kanthal on an 1/8" drillbit I believe? (almost as round as a pencil!)
4-5Wraps of 26gu Kanthal on an 1/8" drillbit I believe? (almost as round as a pencil!)
Also getting good flavor from CLS in the Quasar. The single most important variable I have found is the height of the coil off the deck, and the positioning relative to the air intake. I like coils with "long legs", as close to the AFC as I can get them (edge of the deck), and slightly above the AFC intakes. There may be additional guidance from more experienced builders forthcoming.
This is pretty much how I do mine. With cotton IMO less is more also. Airflow has a lot to do with what ohm build your vaping. If your cranking up the heat with low/sub ohms youll need more airflow. Higher ohms less airflow. That's why I usually try to get devices with AFC or I have RDA's drilled out with different sized airholes. Like I have an IGO W drilled out with bigger holes than my Nimbus. I use lower ohms on the Igo and higher ohms on the nimbus. This is all IMO as there are people who know WAY more than I.
Taki, is there a big difference between a Xobe driver and a regular cannon?
I'm probably going to try it tonight, regardless. I've got the regular cannon right now pretty close to the air hole.
Oh, I did a build yesterday trying to get the best flavor from CLS I could. Bottle is 1.5 months old.
1.2 OHM 28 gauge, probably 8 wraps around a screwdriver spaced out. Put it on a Taifun GT dripper with bottom airflow, using a Provari at 4.6? Volts, as close to the 15 watts as I could get.
It was pretty good, but I think I could do better. I might try a 0.7 on the Reo tonight and get 22 watts.
What watts do you guys prefer CLS on.
1.2 OHM 28 gauge, probably 8 wraps around a screwdriver spaced out. Put it on a Taifun GT dripper with bottom airflow, using a Provari at 4.6? Volts, as close to the 15 watts as I could get.
It was pretty good, but I think I could do better. I might try a 0.7 on the Reo tonight and get 22 watts.
What watts do you guys prefer CLS on.
How are you liking that Brass Monkee? Have been wanting to try it out, after seeing a few reviews . I see that the manufacturer sells them direct on ebay .
Sent from my iPhone using Tapatalk
It's a decent atty - I like the center post since it has two holes - nice for lower guage builds (duel macros, 26gu, etc). I use the stainless cap more than the brass one since it has AFC - might use the brass more once I get the air holes drilled out though. Still might go 1/8" in it, maybe smaller
Just a coil leaning in the opposite way. It's what I've been doing.
http://www.e-cigarette-forum.com/fo...coils-increase-vapor-flavor-th-405-print.html
Anyway, I just bent my coil backwards to make it a Xobe, BUT I have vapors tongue, can't taste anything. Even though I tilted it so that the top of the coil is closer to the center, my coil must be high enough up so that the bottom is right on the air hole, it's kicking out a ton of vapor.
We'll see tomorrow when my mouth is better, I haven't gotten vapors tongue this bad in 2-3 months.
I consider myself a bit of a noob, but a 1.3 - 1.5 ohm coil in my kayfun wicked with cotton really brought out the flavor of CLS for me. Using it on a DNA 20 mod and I play with the wattage some from 9-12. I really get the creamy vanilla on this.
I've found cotton to be my personal wicking material of choice, but I don't have experience with much else besides stock heads (silica), and mesh. Comparatively speaking, it's not even a fair fight.
I found pouring it into my crappy pro tank to be almost sufficient. Then I wrapped the tank with 28 kangel for cool effects. Ps I have no clue what I'm talking about.
Sent from my iPad using Tapatalk HD
Sent from my iPad using Tapatalk HD
- Status
Similar threads
