Considering Building a Mod

[V-rAtH]

Hello everyone! I'm pretty new to this, using a 510 with mega manual batts right now and boge cartomizers. I bought some e-juice from madvapors, they seem pretty good, I did notice at USA Made Vapor Renu that they had extra things to add to the juice, like caff or ginseng. Anyone have any experience with these?

So, to the reason for this post. I am an Electronics Technician and a certified Micro-Miniature repair Tech, so of course I'd like to try my hand at my own mod. At my job I have a large supply of these radios/batteries/chargers.
http://www.mistletoenholly.com/images/store/fullsize/110629021646.jpg
http://www.batterywarehouseco.com/catalog/images/BNH-3278.JPG

NiMH 7.5V 3000MaH I'm pretty sure I could hollow out a bad one, put a voltage display in the window, put a squeeze bottle inside, and run the atty connector up through the antenna jack. Then I could wear it around work like a radio...except I smoke it.

The only thing I'm unsure about is making a juice box mod. Anyone have experience with these? Likes dislikes, things I should consider going into this?

I've picked out these items for it

510 Battery Connector, Gold, Large Hole
Mini Push Button Switch -- Red
Variable Voltage Regulator Board Kit Rev 1
Battery Voltage Indicator

I know this is in the wrong forum...but this is where I can post.

Oh, If I do build it, it'll probably be the most expensive mod casing ever used, at 4 grand.

Anyone have thoughts, comments?

 

[V-rAtH]

Just realized I am at 16 posts, should I repost this in mods forum, or should I ask for a mod to move it?

 

[YorekTexas]

yep, lots of bottle fed mods out these days, a few of them are pretty popular. One is completely fabulous, but difficult to get your hands on. Good luck!

 

[MickeyRat]

Just realized I am at 16 posts, should I repost this in mods forum, or should I ask for a mod to move it?

Personally, I'd say do some reading there first. I'm in the process of attempting to build an elementary wetbox myself. Of course if you could design a new homemade atomizer they'll worship you there.

 

[dormouse]

Also check out the MadVapeMods forum
MadVapes e-Cig 'How To' Tutorials • Index page

 

[toddos]

If you're going to make a bottom-feed juice box mod, there's one thing that you cannot forget -- a catch cup. You need a place for juice to go when you over-squonk (and you will over-squonk, or you won't be keeping those LR atties nice and wet). If there's no catch cup, the juice will just run all over the outside of the box, getting on your hands, wasting juice and making things messy.