two 510 connectors on same mod?

[alumrock]

Hi, i want to build a mod from scratch with two 510 connectors, a bit like the E-Hose by starbuzz, i was just wondering if 3.7v will go to both connectors or if half the voltage will go to each connector, if so will i need two 3.7v batteries? Also im a bit confused with the batteries i have to use as some people have told me its fine to use unprotected, but there wont be any circuitry in the mod so i should use protected batteries right? Thanks in advance

 

[Penn]

If you connect in parallel both will get the full voltage of the batter. Positive of battery to both center pins.

Edit - And yes, use protected for many reasons including avoiding over discharge. Make sure the batter can handle the additional current since a parallel connection will double the amps (not actually cut the resistance in half like many claim).

 

[alumrock]

Thanks a lot for the advice, i dont quiet understand what you said about the amps, should i use a battery with high amps and if so how many amps is considered a high ampage? Or is there any battery you could reccomend? I want an 18650 sized one, thanks mate!

 

[Penn]

On this board you will frequently see the word "mod" referring to advanced power supply devices but the origin of the word is people either modifying or building their own. There is a section here for that. Get 2 more posts under your belt and you can post there. For now you can read more since I'm not sure what your knowledge entails. Battery Mods

Read a lot before you do your build.

 

[alumrock]

Im not a total beginner but not an expert either, thanks a lot for your help, ive started building it now, but ill pobably finish building it after my uni exams

 

[Izan]

Hi, i want to build a mod from scratch with two 510 connectors, a bit like the E-Hose by starbuzz, i was just wondering if 3.7v will go to both connectors or if half the voltage will go to each connector, if so will i need two 3.7v batteries? Also im a bit confused with the batteries i have to use as some people have told me its fine to use unprotected, but there wont be any circuitry in the mod so i should use protected batteries right? Thanks in advance

I think the Silver bullet was the first or one of the first.
Example of type:

Big question is:

Why?

Have fun
I

 

[alumrock]

Its just a bit of fun really, i know a dual coil would probably be the same, i use an iclear30 anyways but it just seems like a cool concept to try lol

 

[bulldog63h]

You could also have a different flavor in each carto to mix them. Or have two fire buttons so you can fire one at a time so you have two flavors you can switch between effortlessly.


Sent from my iPad using Tapatalk

 

[p7willm]

Please be VERY careful. These batteries contain more energy than you expect. They can seriously HURT you.

Before doing this you need to understand some basics about electricity. Or have someone you know and trust design the circuit for you.

A lot depends on how you wire it up. Be VERY careful and check the resistance to avoid problems.

 

[alumrock]

What do you mean by design the circuit? I thought if i use a protected battery i simply need a switch and 510 connectors?