Constantly filling bottles...

Status
Not open for further replies.

Spydro

Sindoyen
ECF Veteran
Verified Member
Apr 20, 2013
5,835
22,113
nowhither
I bought 3 Mini 1.0's... then I did a bad thing, I bought 3 O-16 atty's for them.

Really like the Mini 1.0 & O-16 atty combination ALOT, but have to admit I am getting tired of filling the bottles in all three of them several times a day/night. My long DLH's drain the baby bottles dry in no time IOW. I am also mostly ignoring all my other Reos because of them. I know, the shame of it all.

So with my head held low, anyone know of a larger capacity bottle that will fit in the Mini 1.0's? :blink:
(the 6ml square soy bottles will fit side to side, but hang out way too far to put the door on)
 

Rat2chat2

ECF Guru
ECF Veteran
Verified Member
Apr 16, 2013
11,842
53,835
North Carolina
MG_30.gif
Look forward to reading the suggestions. . .
 
Last edited:

Spydro

Sindoyen
ECF Veteran
Verified Member
Apr 20, 2013
5,835
22,113
nowhither
Just put the 16 on a grand and get used to the larger size in a couple of days?

"Really like the Mini 1.0 & O-16 atty combination ALOT..." can't see a little 16 on the Grands.
My Grands run Nuppin's, my 2015 Woodvil's run Nuppin's, my Mini 2.1's are not LP so they run Chalice.
 

DoubleDZA

Senior Member
ECF Veteran
Aug 29, 2014
158
480
South Africa
I run my O16 on my Grand, where the 6ml bottle used to last me all day, it only gets me half a day with the magical O16. Flavor and clouds are second to none, its the best atomizer I've vaped on and Ive had 90% of them.

2 things to take away from this comment:

1: The O16 is frikken awesome, so much so I've order a second one

2: I am no help to your thread


:lol: :pervy:
 

CMD-Ky

Highly Esteemed Member
ECF Veteran
Verified Member
Sep 15, 2013
5,321
42,395
KY
I read the thread on Origen and bought it. It seemed as if it was all that I like about the RM2 (drilled) plus more options. I have tried a bunch of atomizers, liked them for a while, but eventually I drift back to the RM2. I have a few and with builds from 0.5 to 1.6 Ohm.
Sorry to go off topic but thanks.
 

Spydro

Sindoyen
ECF Veteran
Verified Member
Apr 20, 2013
5,835
22,113
nowhither
There is no solution. If the little square bottles don't fit.....that's it. Just gotta weigh the pros and cons..... ;)

I got really tired of constantly refilling those tiny little 3 ml bottles, too......

Hey gal pal...

Yep, the 2 point something ml capacity of the small bottles is just not enough for my use on this mod/atty combo. Not enough for even a wee hours errands run. I could however use those square bottles by leaving the door off. That would be fine for around home and the errands runs, would about double joose capacity.

I have even entertained some comical thoughts involving a 15ml bottle too. :sneaky: MacGyver stuff but that would work fine for around home/the errands and still leave the ever changing of baby batts easy as well.
 
  • Like
Reactions: JC Okie

ENAUD

Resting In Peace
ECF Veteran
Verified Member
Jul 23, 2013
9,810
64,089
Bordertown of ProVariland and REOville
I tried them square bottles and they did fit, maybe it was the smaller size of them. They worked fine for a while, then suddenly fail and start leaking. One cracked along the edges, another the cap got a crack around the top rim. Both times them bottles failed while I was out of the house, and it was messy.
 
  • Like
Reactions: JC Okie

Spydro

Sindoyen
ECF Veteran
Verified Member
Apr 20, 2013
5,835
22,113
nowhither
Here's how I roll with the mini :)


View media item 429124
Fill the bottles at the same time, tin doesn't take up too much room. Jut hot swap the bottles as needed. Even got some room for cotton in the little tin.

Looks to be a great on the go package for somebody always on the go. :thumbs:

I try to not be away from home with these mini mod combos long enough to need that much backup. They only go with bottle full with a fresh batt on short runs. I just carry the Reos in a shirt pocket, so don't want to be bothered with spares. Easier to take a larger Reo combo instead when I know my errand run will be longer, usually a Woodvil/Nuppin'. I do however keep a same size blue case of batts right at hand for my 6 baby Reos even around home... with lots of backups to them in my desk batt rack or in the chargers.
 

ENAUD

Resting In Peace
ECF Veteran
Verified Member
Jul 23, 2013
9,810
64,089
Bordertown of ProVariland and REOville
Looks to be a great on the go package for somebody always on the go. :thumbs:

I try to not be away from home with these mini mod combos long enough to need that much backup. They only go with bottle full with a fresh batt on short runs. I just carry the Reos in a shirt pocket, so don't want to be bothered with spares. Easier to take a larger Reo combo instead when I know my errand run will be longer, usually a Woodvil/Nuppin'. I do however keep a same size blue case of batts right at hand for my 6 baby Reos even around home... with lots of backups to them in my desk batt rack or in the chargers.
:lol: That is my at home setup :) If I'm really going out, it's a Grand, and an Altoids tin with a battery and bottle.
 
  • Like
Reactions: JC Okie

DoubleDZA

Senior Member
ECF Veteran
Aug 29, 2014
158
480
South Africa
I read the thread on Origen and bought it. It seemed as if it was all that I like about the RM2 (drilled) plus more options. I have tried a bunch of atomizers, liked them for a while, but eventually I drift back to the RM2. I have a few and with builds from 0.5 to 1.6 Ohm.
Sorry to go off topic but thanks.


:thumbs:

Prepare yourself though, flavorgasim is inevitable :w00t: :headbang:
 
  • Like
Reactions: CMD-Ky

AngiBe

Vapeaholic
ECF Veteran
Verified Member
Aug 19, 2013
15,509
33,366
Indy, IN
Here's how I roll with the mini :)


View media item 429124
Fill the bottles at the same time, tin doesn't take up too much room. Jut hot swap the bottles as needed. Even got some room for cotton in the little tin.

GENIUS idea!!!!!!!!!!!!! Going on vaca soon and love this idea for traveling. Now to find a tin without having to buy the Snus
 
  • Like
Reactions: ENAUD
Status
Not open for further replies.

Users who are viewing this thread