Convert unregulated parallel box mod to a series?

Status
Not open for further replies.

RamShot Rowdy

Battery Police
ECF Veteran
Verified Member
Nov 6, 2009
834
507
Oklahoma, USA
Just curious why you would want to do that?

In a parallel setup the negative terminals are tied together and the positive terminals are tied together. You get the same voltage as a single battery but increased capacity (mah) and current handling ability.

To make it a series mod you'd need to connect the positive of one battery to the negative of the other. The remaining terminals would be tied to the existing negative and positive wiring, positive to positive wire, negative to negative wire. You would get double the voltage with a capacity and current handling ability similar to a single battery. There are some issues running stacked batteries, but I'm no expert on them.

Probably would depend on the mod as far as how easy it is to convert.
 

rolygate

Vaping Master
Supporting Member
ECF Veteran
Verified Member
Sep 24, 2009
8,354
12,405
ECF Towers
This is not advisable as it was the cause of all the mechmod explosions from 2010 to 2012/3.

If you stack batteries (put them in series) then you really need to know what you are doing. As rewiring a boxmod form parallel to series is about the simplest possible wiring job imaginable, then it looks as if you are a beginner with electrics. Therefore the best advice is probably: leave well alone.

Not even going to get into what you're using on the top, coil resistance etc.
 

yovengo

Senior Member
ECF Veteran
Dec 27, 2014
155
30
Houston,TX,USA
Just curious why you would want to do that?

In a parallel setup the negative terminals are tied together and the positive terminals are tied together. You get the same voltage as a single battery but increased capacity (mah) and current handling ability.

To make it a series mod you'd need to connect the positive of one battery to the negative of the other. The remaining terminals would be tied to the existing negative and positive wiring, positive to positive wire, negative to negative wire. You would get double the voltage with a capacity and current handling ability similar to a single battery. There are some issues running stacked batteries, but I'm no expert on them.

Probably would depend on the mod as far as how easy it is to convert.

Theres this one limited box mod that is in parallel but i wanted it in series so thats why i was wondering if someone could rebuild build i guess lol thanks for your response
 
Status
Not open for further replies.

Users who are viewing this thread