Cool Fire1 problem, be aware.

Status
Not open for further replies.

oplholik

ECF Guru
ECF Veteran
Verified Member
Mar 22, 2011
12,078
33,862
San Bernardino area, So. Cal.
Had a problem with my Cool Fire last nite, don't know if this is going to be a common problem with these or not, just be aware if you have one.
I've had mine for a month, or about that.
I picked up the CF1, went to take a hit and it was dead. I took the batt out and checked it on my batt checker and the digital lites didn't even light up, nothing, this shouldn't happen on the CF1. I put in another batt, took a couple hits, and it was fine. I set it back down, and in a few minutes picked it up again, and the tube was very warm, not hot, but much warmer than it should have been, so I immediately took the batt out and set it aside. Won't be using this anymore, as it seems the electronics in it has failed. I checked the topper on it, the one that came with it, and it checked good. So just be aware of this, if you have one of these.
 

VapieDan

Vaping Master
ECF Veteran
Verified Member
Nov 30, 2013
3,295
4,029
Flint, Michigan, United States
Had a problem with my Cool Fire last nite, don't know if this is going to be a common problem with these or not, just be aware if you have one.
I've had mine for a month, or about that.
I picked up the CF1, went to take a hit and it was dead. I took the batt out and checked it on my batt checker and the digital lites didn't even light up, nothing, this shouldn't happen on the CF1. I put in another batt, took a couple hits, and it was fine. I set it back down, and in a few minutes picked it up again, and the tube was very warm, not hot, but much warmer than it should have been, so I immediately took the batt out and set it aside. Won't be using this anymore, as it seems the electronics in it has failed. I checked the topper on it, the one that came with it, and it checked good. So just be aware of this, if you have one of these.

I am starting to suspect innokin has some real problems. Although I have had no problems from my Cool Fire 1 (Yet) I am awaiting my 2nd replacement with the SVD. Switch and board problems on them all. I have contacted innokin directly twice. I would suggest all users having the problems would do the same. Perhaps they will wake up.

Contact us - Best Electronic Cigarette | E Cigarette Manufacturer| Innokin
 

aage

Senior Member
ECF Veteran
Verified Member
Jan 28, 2014
156
153
iceland
Lost all respect for Innokin when I took my DEAD out of the box MVP apart. Junk inside , thin wires and bad soldering along with two thin battery´s.

But anyway my VTR is still working but I dont want to know whats inside of it , I just wait for it to fail to.
Contacted Innokin and got a message they where on a summer vacation :toast:
Will never buy anything from them again.
 
Status
Not open for further replies.

Users who are viewing this thread