Couple of questions.

Status
Not open for further replies.

joedifino

Full Member
Sep 11, 2014
5
2
Montreal, QC
Hey guys, ive been playing around with my innokin vv 3.0
Just a couple of questions.

Sometimes the juice gets really harsh how can i fix that.
Im running at 3.4v 7.5w 1.5ohm on a Kanger Protank Mini 3

Also if i switch to VV mode does it disregard my VW settings and vice versa?

Also what would be the best setting for running it?
i have 18mg 70/30 juice
 

edyle

ECF Guru
ECF Veteran
Verified Member
Oct 23, 2013
14,199
7,195
Port-of-Spain, Trinidad & Tobago
If you switch to vv mode it disregards vw setting and vice versa.

A standard battery puts out 3.7 volts; you can start there and adjust up or down;

If you keep vaping the same coil for days and days it gradually builds up gunk on the coil and tastes bad and worse with time.

If you use high strength like 24mg nicotine with high pg ratio like 80/20, you will get harsher throat hit *cough*
To reduce harshness you use lower strength nicotine and/or lower pg ratio; 30/70
 

edyle

ECF Guru
ECF Veteran
Verified Member
Oct 23, 2013
14,199
7,195
Port-of-Spain, Trinidad & Tobago
that seals the liquid from getting into the air tube above it;

some people try flipping it upside down and find it works better;

in my case i use 2; the normal one plus an inverted one on top because I use the tank part from a protank and the base from a miniprotank and end up with a gap which i fill by using 2 silicone cap seals instead of one
 
Status
Not open for further replies.

Users who are viewing this thread