I have a few different IGO attys where the air hole lands smack dab in the center of the top o-ring. I bought mine when they first became available. Have they moved the airhole placement on current models?
Current production IGO atty question?
- Thread starter Randy C
- Start date
- th_trl_thread_readers 0
- Status
The genuine Youde, (UD), Igo's have the correct hole placement. I know a lot of the knock-off's or clones seem to have them drilled a little too low... When they first came out there was quite a problem and it was narrowed down to who sold the genuine Youde brand. There are a bunch of chinese knock-offs out there still and the only real way to tell this is usually by the air hole placement.
Last edited:
Can you please let me know of any vendors who carry the UD IGOs?
Hey Randy
I just recieved my Igo-L from this vendor
IGO-L Rebuildable Dripping Atomizer (Stainless Steel - Youde)
Only Igo they have at the moment but at $9.99.... what the hay!
Came in the Youde box, airhole is spot on so it would seem to be the real deal (-:
I just recieved my Igo-L from this vendor
IGO-L Rebuildable Dripping Atomizer (Stainless Steel - Youde)
Only Igo they have at the moment but at $9.99.... what the hay!
Came in the Youde box, airhole is spot on so it would seem to be the real deal (-:
101 has genuine Igo-w's (holes in post, way easier) for 9.99 and a $1.99 shipping.
Genuine Youde IGO-W - 101 Vape
Maybe my quality UD AGA-T2 will soon meet some quality UD friends
Just a few more bones than FT random QC junk.
Hope I'm not dreaming.
Just a few more bones than FT random QC junk.
Hope I'm not dreaming.
Pic looks like one hole opposite cap logo but most reviews state 2 air holes; likely comes w/ 2 air holes?.
I'm also interested in AGA-T2 but 101vape shows red o ring; my KP AGA-T2 has clear silicon tank grommets; perhaps old pic?
Edit: Noticed KP pics show red AGA-T2 O-rings; must depend on DOB.
Last edited:
Yeah based on the reviews they must have 2 holes (which you would normally expect on a W), for some reason the pics dont make it obvious or used a different 1 hole top cap pic on the site.
Dunno much about the AGA-t2/o-orings, but 101 is pretty good about customer support, so worst case, ask them what exactly you'll be receiving.
Already received UD RBAs I ordered this week. Still waiting on FT Pulse G I ordered last November.
I got IGO-F, IGO-W, AGI and AGA-TD. All in correct UD box and all look genuine.
AGI has new shorter gold hot spring design; I did a spring mod anyway because volt drop was still a little high. AGI volt drop excellent after stuffing copper wire inside spring. Near mirror polish. Vapes great.
IGO-F is beautiful w/ near mirror polish.
AGA-TD is new design. Has 5 air holes. One is for single coil, others for dual coil. Near mirror polish. Vapes great.
IGO-W has 2 air holes and near mirror polish.
So nice to finally have some quality toppers.
Not sure what to do w/ my FT junky toppers.
I got IGO-F, IGO-W, AGI and AGA-TD. All in correct UD box and all look genuine.
AGI has new shorter gold hot spring design; I did a spring mod anyway because volt drop was still a little high. AGI volt drop excellent after stuffing copper wire inside spring. Near mirror polish. Vapes great.
IGO-F is beautiful w/ near mirror polish.
AGA-TD is new design. Has 5 air holes. One is for single coil, others for dual coil. Near mirror polish. Vapes great.
IGO-W has 2 air holes and near mirror polish.
So nice to finally have some quality toppers.
Not sure what to do w/ my FT junky toppers.
Good stuff guys. Thanks for your replies. Do you like the smaller Igo's or the larger ones?
I like all my UD RBAs. I think you need a few of each.
I prefer small chamber for quality vapor and large diameter for the clouds.
However, I'm using some 22 mm for quality vapor because they look so sweet on a 22mm tube.
The small diameter IGO-W and it's brothers don't match my mods diameter but are good quality with handy post holes on 3 posts.
The $13 AGI is a steel for a 22mm single coil RDA. I sprung for the extra dough over $9 IGO-L because I like the form factor. Yeah, I'm a big spender. I'll probably get an IGO-L later for kicks.
It's a steal at $9.99.
Youde IGO-F - 101 Vape
Outstanding vapor quality which 22mm can't quite match.
USA fast shipper vendor.
High quality device.
Looks beautiful on all my tube mods and my trusty Altoids mod.
IGO-F produces smooth as silk throat hit (difficult to achieve smooth TH w/ larger diameter RBA).
Small tank makes drip timing easy.
Near mirror polish.
Solid feel due to screw tank and dedicated DT.
Air hole is perfect size for quality vape and respectable clouds; not airy, not tight.
Refreshing to use a light weight topper after lifting those heavy 22mm RBAs.
Youde IGO-F - 101 Vape
Outstanding vapor quality which 22mm can't quite match.
USA fast shipper vendor.
High quality device.
Looks beautiful on all my tube mods and my trusty Altoids mod.
IGO-F produces smooth as silk throat hit (difficult to achieve smooth TH w/ larger diameter RBA).
Small tank makes drip timing easy.
Near mirror polish.
Solid feel due to screw tank and dedicated DT.
Air hole is perfect size for quality vape and respectable clouds; not airy, not tight.
Refreshing to use a light weight topper after lifting those heavy 22mm RBAs.
^^You are one of the very few to actually get it to vape decently. I have read so many negative things about this RBA. I don't think it got even 1 thumbs up from PBusardo... He renamed it the Igo-F(ail)...
I watched Pbasardo IGO-F review.
UD is very responsive to reviewer's complaints.
AGA-TD was upgraded to include single coil cap air hole after Todd's complaint.
AGI hot spring was upgraded for more current since Rip Tripper's complaint; may still need mod for minimal volt drop.
IGO-F air hole was raised after PBasardos complaint.
IGO-F cap is snug after PBasardo's complaint.
Me vs PBasardo IGO-F review:
$10 vs $25.
New air hole is high vs old design low air hole.
Skinny wick through deck wicks great vs fat deck wick chokes wick.
I top tank once then use as dripper vs does not work great as dripper.
One skinny deck hole wick & 2nd wick on deck floor vs One too fat deck hole wick & other end suspended in air.
Mine wicks fantastic vs does not wick well.
Air hole diameter is perfect vs air hole too small.
Cap fits snug vs cap spins.
Bottom fill port unnecessary vs we agree here.
Easy to pull wick though deck by unscrewing tank vs hard to push wick though deck hole.
I like solid feel of fixed drip tip vs stuck w/ UD DT.
DT design good air flow vs NA.
DT design good for dripping vs NA.
304 SS is awesome vs made of 304 SS.
IGO-Fantastic vs IGO-Fail.
I love PBasardo don't worry about that.
UD is very responsive to reviewer's complaints.
AGA-TD was upgraded to include single coil cap air hole after Todd's complaint.
AGI hot spring was upgraded for more current since Rip Tripper's complaint; may still need mod for minimal volt drop.
IGO-F air hole was raised after PBasardos complaint.
IGO-F cap is snug after PBasardo's complaint.
Me vs PBasardo IGO-F review:
$10 vs $25.
New air hole is high vs old design low air hole.
Skinny wick through deck wicks great vs fat deck wick chokes wick.
I top tank once then use as dripper vs does not work great as dripper.
One skinny deck hole wick & 2nd wick on deck floor vs One too fat deck hole wick & other end suspended in air.
Mine wicks fantastic vs does not wick well.
Air hole diameter is perfect vs air hole too small.
Cap fits snug vs cap spins.
Bottom fill port unnecessary vs we agree here.
Easy to pull wick though deck by unscrewing tank vs hard to push wick though deck hole.
I like solid feel of fixed drip tip vs stuck w/ UD DT.
DT design good air flow vs NA.
DT design good for dripping vs NA.
304 SS is awesome vs made of 304 SS.
IGO-Fantastic vs IGO-Fail.
I love PBasardo don't worry about that.
Example. Fill tank with 0mg. Drip with 4mg. When TH wains, IGO-F is telling you it's past time to drip. I find that drip alarm very entertaining but then I don't get around much.
- Status
Similar threads
- Locked
