ok we are going to do this to avoid any other headaches, kim i spoke to you and wally as well.
we will prep the x6 and place them in alpha.
This is exactly why I love GV..... The tank actually vapes very good. Just needs Alpha to help tweek it
ok we are going to do this to avoid any other headaches, kim i spoke to you and wally as well.
we will prep the x6 and place them in alpha.
Cleaning is laborious, but not impossible. I use a 20ml syringe with a long 14g needle. With the needle in the tank I run hot water through it shaking it occasionally until the wicks are clean.
To dry, I have an aquarium pump rigged with a manifold and another luer lock needle and pump air into the tank until dry (forgot and left it overnight so not sure how long it actually took.)
Dry burn and you’re ready to go – don’t look forward to the coil swap though.
OK - looks like it is chrome plated copper, so I will have to pass on this one. Every chrome-plated copper deviced I have ever had, the chrome starts wearing off after a few months. Hope you guys can get something like this in stainless steel.
Anyone have any suggestions re. stainless 18650 mech mod with side button and ego compatible?
Reviews: Super New KTS Mechanical Kit - The Kamry Telescopic Storm! [gv-KTSTelecopeMod] - $69.95 : GotVapes.com, E-cigarette Supplies - Atomizers Cartomizers Mods Juice and more
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
Super New KTS Mechanical Kit - The Kamry Telescopic Storm!
$79.95$74.95 Special Price for First Week!
We have been using this mod in testing and VERY IMPRESSED! Not only is it able to telescope to use three different batteries: 18350, 18500 and 18650 but this chrome beauty has a lightweight comfortable feel in the hand, very pleasant and practical in use.
The mechanical fire button is located at the base of the unit and its 'play' can be adjusted. You can also screw all the way up to lock it in place so the unit does not automactically fire.
We are offering the full kit with: The KTS Telescoping Mechanical Mod
- 2 18650 Batteries
- Wall battery charger
- X6 2.5ml 2.4ohm Replaceable 4 wick tank with coil head
- 2 Extra 2.4ohm coil wicks
- Large zippered eGo Case with belt loop.
- Thorough manual
- FANTASTIC Breakthrough Price!
Using an 18350 Battery On This Mod
To use an 18350 battery you need to remove the outer tube . Then thread your mod head on to the proper side of the inner tube. You then drop your battery into the unit and screw in the bottom part of the inner tube until secure. BE VERY CAREFUL ON THE THREADING! The threading is specific on either end on where it screws into. If this is not threading smooth do NOT force it or you will cross thread and ruin this part of the mod. We cannot accept returns on this mod if that happens and right now we do not have extra tubes so BE CAREFUL!
Other Features
- Fully vented on the top and bottom (see pictures to the left)
- This sports an eGo well meaning it will accomodate any CE4 style clearo that does not require outside threading to connect. For instance our Stardusts and ReDux will work...we have not been able to confirm others at the time of this posting.
- Can be fully disassembled from top to bottom for cleaning.
- Lightweight so that it is very practical and comfortable in every day use.
- 14 day warranty from receipt of purchase
Cleaning is laborious, but not impossible. I use a 20ml syringe with a long 14g needle. With the needle in the tank I run hot water through it shaking it occasionally until the wicks are clean.
To dry, I have an aquarium pump rigged with a manifold and another luer lock needle and pump air into the tank until dry (forgot and left it overnight so not sure how long it actually took.)
Dry burn and you’re ready to go – don’t look forward to the coil swap though.
Reviews: Super New KTS Mechanical Kit - The Kamry Telescopic Storm! [gv-KTSTelecopeMod] - $69.95 : GotVapes.com, E-cigarette Supplies - Atomizers Cartomizers Mods Juice and more
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
Super New KTS Mechanical Kit - The Kamry Telescopic Storm!
$79.95$74.95 Special Price for First Week!
We have been using this mod in testing and VERY IMPRESSED! Not only is it able to telescope to use three different batteries: 18350, 18500 and 18650 but this chrome beauty has a lightweight comfortable feel in the hand, very pleasant and practical in use.
The mechanical fire button is located at the base of the unit and its 'play' can be adjusted. You can also screw all the way up to lock it in place so the unit does not automactically fire.
We are offering the full kit with: The KTS Telescoping Mechanical Mod
- 2 18650 Batteries
- Wall battery charger
- X6 2.5ml 2.4ohm Replaceable 4 wick tank with coil head
- 2 Extra 2.4ohm coil wicks
- Large zippered eGo Case with belt loop.
- Thorough manual
- FANTASTIC Breakthrough Price!
Using an 18350 Battery On This Mod
To use an 18350 battery you need to remove the outer tube . Then thread your mod head on to the proper side of the inner tube. You then drop your battery into the unit and screw in the bottom part of the inner tube until secure. BE VERY CAREFUL ON THE THREADING! The threading is specific on either end on where it screws into. If this is not threading smooth do NOT force it or you will cross thread and ruin this part of the mod. We cannot accept returns on this mod if that happens and right now we do not have extra tubes so BE CAREFUL!
Other Features
- Fully vented on the top and bottom (see pictures to the left)
- This sports an eGo well meaning it will accomodate any CE4 style clearo that does not require outside threading to connect. For instance our Stardusts and ReDux will work...we have not been able to confirm others at the time of this posting.
- Can be fully disassembled from top to bottom for cleaning.
- Lightweight so that it is very practical and comfortable in every day use.
- 14 day warranty from receipt of purchase