deejStuff is HERE! (Part Two!)
- Thread starter Digimon2k
- Start date
- th_trl_thread_readers 0
- Status
kitty is quick!
kitty is wise!
Kitty is blushing!
well... not really...
Been vaping on one of these EPower Dual Coil guys... I like them better than the standard 510 XL DCCs!
If you've got an EPower 14650, I can definitely recommend these....
Even if you're using eGo batts, they work...
If you've got an EPower 14650, I can definitely recommend these....
Even if you're using eGo batts, they work...
well, the capacity grabs my interest... about 5mL
The coils seem to fire a bit better (hotter?), and the although I haven't dug out my calipers, they appear to be a wider-diameter winding. Airflow is good, and the mouthpiece stays in place for mouth-holding... at least so far.
Now, they aren't clear, so you can't monitor juice level as easily, but I would think 5mL would last most folk for a day... just top off each morning. (and if you're burning through more than 5mL/day... wow!)
I like that they're the same diameter as the battery casing, too. The skirt around the connector adds to the overall stability of the assembly, making dropping it a non-event unlike the 510 carto.
To sum up... more vapor production (not tons more, but it's there), easier draw, large capacity.
InsaneManiac is an early adopter... he should have his today sometime... hopefully he'll chime in with his take on it.
The coils seem to fire a bit better (hotter?), and the although I haven't dug out my calipers, they appear to be a wider-diameter winding. Airflow is good, and the mouthpiece stays in place for mouth-holding... at least so far.
Now, they aren't clear, so you can't monitor juice level as easily, but I would think 5mL would last most folk for a day... just top off each morning. (and if you're burning through more than 5mL/day... wow!
)I like that they're the same diameter as the battery casing, too. The skirt around the connector adds to the overall stability of the assembly, making dropping it a non-event unlike the 510 carto.
To sum up... more vapor production (not tons more, but it's there), easier draw, large capacity.
InsaneManiac is an early adopter... he should have his today sometime... hopefully he'll chime in with his take on it.
Nice... Heck, if it holds 5ml, you should be able to weigh the damn thing empty, and full and tell with a gram scale how much it needs.
What kind of threads?
What kind of threads?
Nice... Heck, if it holds 5ml, you should be able to weigh the damn thing empty, and full and tell with a gram scale how much it needs.
What kind of threads?
510 threading. They mate perfectly on the EPower.
The diameter is about 1/4" larger than a standard eGo batt, so there's no worries vis-a-vis the skirt, but it does look kinda funny sitting on top of an eGo batt.
510 threading. They mate perfectly on the EPower.
The diameter is about 1/4" larger than a standard eGo batt, so there's no worries vis-a-vis the skirt, but it does look kinda funny sitting on top of an eGo batt.
Very interesting. I have always been a bit leery of the large capacity tanks/cartos cause it would seem to be a heck of a waste if it was a dud. Let me know how it goes bro.
I might have to get a few just to play with them.
Judging by the pictures, the male 510 threads are recessed into the carto body? So those cartos really only work on some 510's right?
correct... anything with a recessed connector wouldn't work unless it was a smaller overall diameter than the carto itself (to clear the skirt).
well... except the EPower, which it was made for.
Also, I wouldn't use these on anything less than a 650mAh, and even then I might be hesitant. The EPower runs a 1050mAh...
well... except the EPower, which it was made for.
Also, I wouldn't use these on anything less than a 650mAh, and even then I might be hesitant. The EPower runs a 1050mAh...
I was thinking altoids (2000 mAh Nimh, or 3600 mAh Lithium).... Maybe someone makes an extender.
I know if you stacked 2 of my 510-510 adapter thingies it'd work... 1 isn't long enough, but 2 is.
There'd be a gap, though. Maybe 1/16" between the bottom of the carto and the surface of the box...
There'd be a gap, though. Maybe 1/16" between the bottom of the carto and the surface of the box...
Interesting.... I'd hate to see what would happen to the monstrosity if it was dropped.
well... I'm pretty sure there wouldn't be a thermonuclear detonation...
you ARE using non-nuclear batteries, right?
you ARE using non-nuclear batteries, right?
No, of course not. It is a tin box though. 
Pretty sturdy, but it is lands wrong, something is going to give.
Pretty sturdy, but it is lands wrong, something is going to give. 
No, of course not. It is a tin box though.
I could see the connector being ripped out of the box if it hits wrong, yeah...
- Status
Similar threads
- Locked
- Locked
