disposable carto on a LT?

[icanbreatheagain]

As im vapeing my logic dis. i was thinking, i get twice the life out of a logic carto if i vape the original battery till its dead and then drop that carto on the njoy rechargeable battery that i have. i searched to no avail on if i could use a disposable 2 piece carto on a Lava tube when it arrives? im assuming these logics are all 510s in disguise?

 

[AttyPops]

LT is vv and 510 threaded. If it's 510 carto thread, it will work. Volts is volts, so if you match it up properly, should be a non-issue. Use low voltage (like around 3.2). IDK about njoy/logic threading or I could tell you for sure.

EDIT: NJoy = RN4081 per another thread. Maybe they have diff models with diff threads, IDK.

Here's a thread:
http://www.e-cigarette-forum.com/fo...nk-discussion/276332-510-rn4081-adapters.html
They talk about an adapter if you think it's worth it.

 

[icanbreatheagain]

LT is vv and 510 threaded. If it's 510 carto thread, it will work. Volts is volts, so if you match it up properly, should be a non-issue. Use low voltage (like around 3.2). IDK about njoy/logic threading or I could tell you for sure.

EDIT: NJoy = RN4081 per another thread. Maybe they have diff models with diff threads, IDK.

Here's a thread:
http://www.e-cigarette-forum.com/fo...nk-discussion/276332-510-rn4081-adapters.html
They talk about an adapter if you think it's worth it.

thank you. research time

 

[Forkeh]

It'll work fine and dandy, as long as the Logic cartos (atty and carts?) are 510 threaded. Now, do be aware that resistance will play a roll in quality of output (sorry I don't know anything about the Logic gear and can't speak further on this). LTs recognize attys/cartos/etc with low resistance and will bump the voltage down. If your equipment is standard resistance, not much to think on. If it's low resistance, you might have a problem in terms of satisfaction; or perhaps not. Different strokes for different folks.

Also, be aware that the higher the voltage, the faster you go through juice. If you're vaping high, you'll go through the carto (cart?) faster.

 

[icanbreatheagain]

It'll work fine and dandy, as long as the Logic cartos (atty and carts?) are 510 threaded. Now, do be aware that resistance will play a roll in quality of output (sorry I don't know anything about the Logic gear and can't speak further on this). LTs recognize attys/cartos/etc with low resistance and will bump the voltage down. If your equipment is standard resistance, not much to think on. If it's low resistance, you might have a problem in terms of satisfaction; or perhaps not. Different strokes for different folks.

Also, be aware that the higher the voltage, the faster you go through juice. If you're vaping high, you'll go through the carto (cart?) faster.

thanks for the info, i learned about the resistance(ohms) aspect after some research last night. not much info on the thread issue so i guess ill have to wait and see when my LT arrives