DNA 30 clone with Eleaf Lemo best resistance?

[deadmeadow]

What would be the best ohm coil to use using 28g kanthal?
Not dripping, I'll be tanking it and using it on the go and chainvaping. Want the best powerful vapor and flavor within the limits of my setup.
I'll be using a Sony 30A battery if that makes any difference.

 

[Silence]

Steam Engine is best resource I've found for such questions. I didn't see the eleaf Lemo on there but there are a couple dna-30 mods. May give you a starting point.

 

[danca90]

I go for around 1 ohm, and 18-2o watts. I'm using a kayfun, and ipv2.

 

[Susan~S]

The Lemo is very similar to a Kayfun and as such will work best at resistances above 1 ohm due to airflow and wicking. My Kayfun Lite+ v2 preforms best (for me) between 1.4 and 2.0 ohms.

 

[bungalow]

I found my best flavor/vapor at .7 ohm on a segelei 100w +
Running around 30 watts

 

[VaPreis]

My favorite build in the Lemo is a single 26ga "macro" coil at 2.2mm, 11 wraps, for about 1.25Ω. I run it at 20-25 watts on my Cloupor 30 Watt.

 

[bungalow]

People seem to be saying that's it's "best" above 1 ohm but I find much better flavor (and better all around) at .7ohm. I have a single 1/16" wrap using 26 gauge and this is the best vapor I've had with this lemo so far. I've been tinkering and trying different builds constantly for a week

 

[KGB7]

My all time favorite so far; 24gauge, 6 wraps 3.4mm, 0.7ohm at 25watts.(max 35w before dry burning as wick cant keep up).

Ive tried a 28g coil at 1.7ohms 2.5mm, and it was eating my batteries way too fast and lack of flavor.