Does anyone have detailed instructions on how to build a small box mod?

[dalas56]

I have been wanting to build a box mod for a few months now. But dont know exactly how to. I know the basics, but i need some help. I just want a simple box mod. No juice feeders. Simple and hopefully easy.

 

[MuddyWaterMan]

Here are 2, one juice one not...... I know you said no Juice Box but thought I would throw it out there for when you do want it

http://www.e-cigarette-forum.com/forum/battery-mods/106016-how-build-puck-13.html



http://www.e-cigarette-forum.com/forum/modders-forum/95728-tutorial-juicebox-around-8-a-14.html

 

[dalas56]

thank you very much.

 

[Para]

I have been wanting to build a box mod for a few months now. But dont know exactly how to. I know the basics, but i need some help. I just want a simple box mod. No juice feeders. Simple and hopefully easy.

If I were starting out I'd go to Madvapes Forum HERE for the Tutorial and order the complete kit from them as well. Begin with something simple, gain some experience, and then try a juice feeder or something a bit more complex. Good luck; you'll love building your own PV's.

 

[four2109]

Or use the original tutorial, Nicowolf's Nicostick. You won't have to bother with fabricating the connector like she did when she built the first one.
http://www.e-cigarette-forum.com/forum/battery-mods/18409-how-build-nicostick.html
If you look in the battery mod section there is another sticky discussing it.

 

[Kahuna]

I found that if you use a MOSFET or a regulator, solder them in last. That way they get the least amount of heat of all the components. Also if when doing your first mod, be liberal with the wire, you can always easily shorten, but can lengthening is a but more work.