Does anyone sell.....
- Thread starter rkh3
- Start date
- th_trl_thread_readers 0
- Status
If you mean the KR808D-1
Nhaler
cigeasy
mist-stix
vapor4life (Vapor King)
choicevapor (Fusion)
eastmall (DPV9)
healthcabin
Nhaler
cigeasy
mist-stix
vapor4life (Vapor King)
choicevapor (Fusion)
eastmall (DPV9)
healthcabin
Just looked at all those sites and no one sells just the vaporizer or cartridges, only cartomizers.
The Vapor King is a two piece model. You buy the battery and the cartomizers. There are no seperate carts/atomizers. I am wondering if you are mixing it up with something you purchased from the vapor kings. The vapor king company sells various e-cigs, but none are the Vapor King e-cig (kr808D-1).
As far as I know the 901 atomizers work with the KR808D-1 if that's what you have.
I'm confused. Where did you buy it? Do you know the model number. Nice Grand National by the way.
A vapor king consists of a battery... and a cartomizer. You can buy each of them seperately on any of those sites... what is it specifically you want?
EDIT: Although the VK does specify that they have special cartomizers and batteries that no-one else has, they are 100% compatible with any KR808D if you want to change things around, try other brands, or even try Greencig cartomizers (my fav)
EDIT: Although the VK does specify that they have special cartomizers and batteries that no-one else has, they are 100% compatible with any KR808D if you want to change things around, try other brands, or even try Greencig cartomizers (my fav)
Last edited:
Hey HaploVoss, are the greencig cartomizers worth the price? I haven't bought the KR808D-1 yet but I plan on it.
My opinion of course, but I am totally won over by the Greencig cartomizers. This is my recommendation: Standard KR808D batteries or Ultimate kit or whatever kind of kit of your choice for your budget (main thing is we need the KR series batts) Then snag a pack of Greencig carts.
Resoning: Greencig batteries are weird. The cutoff is WAYYY too short, I mean like 3 seconds or something, and the life is not great either KR batteries have GREAT battery life.
Cartomizers: Greencig Cartoz actually have a cartridge with filler inside that you can pop out and refill, or if you feel like it, toss it asside and direct drip on the atty in the bottom of the carto!!! You are actually getting a complete atty/catridge per cartomizer ---> KR series cartomizers are wired with the the atty coil litterally going up through the center of the carto, over and back down the side of the filler that is wrapped around the entire thing. Although you can refill them for a long time if you are carefull you WILL burn them at some point and you WILL have to be careful
Greencig carts, for at home testing I'm still pounding one of them in particular with direct dripping, and one of them refilling normally to see how long they will take it.
I cannot tell you how nice it is to just fill a couple of cartos like I did this morning though and go to the local fair with my wife and family. One battery and 2 carts lasted my wife and I all day. Got in the car to leave and had to pull out the second battery
Take care,
- Hap
So can you remove the filler on the KR carts or just refill them? Also do you have any of the KR batteries from Nhaler? If so, what color LED'S?
Sorry for diverting from the OP's question.
Sorry for diverting from the OP's question.
Last edited:
I'm not sure what selection of LEDs if any Drew has - but I got the silver (basically no paint job) batteries with orange LED. I'm not picky and I like the stainless steel look on stoofs...
The KR carts are not a simple replacement on filler material at all. I've tried many times... all of them were hours spent on each, none of them were ultimately entirely successful. The main problem being that the atty 'element' wire is encased in the filler, and also encasing the filler, so pulling / cutting it out is almost impossible to do without damage to the atty. If you are able to do it, then you have the problem of filler material right on top of the atty coil and if you have burned through the special wrapping material, then unless you go buy special siad materials, you will instantly melt Fluval, Nylon, or Filter type materials that I have tried.
Refilling them several times - rinsing them out when they seem to get harder to draw / aren't accepting as many drops during refills, etc. are the best way to use these. AND they are great cartomizers. I am not knocking them one bit at all. Fantastic stuff.
I just like the Greencig ones because I can drip them if I want to so I can try out flavors just like I do with a regular atty, and I can replace the filler if I ever need to, and the build quality just seems a bit nicer. As my wife says though... I'm kind of a tinkering picky .......!
- Hap
The KR carts are not a simple replacement on filler material at all. I've tried many times... all of them were hours spent on each, none of them were ultimately entirely successful. The main problem being that the atty 'element' wire is encased in the filler, and also encasing the filler, so pulling / cutting it out is almost impossible to do without damage to the atty. If you are able to do it, then you have the problem of filler material right on top of the atty coil and if you have burned through the special wrapping material, then unless you go buy special siad materials, you will instantly melt Fluval, Nylon, or Filter type materials that I have tried.
Refilling them several times - rinsing them out when they seem to get harder to draw / aren't accepting as many drops during refills, etc. are the best way to use these. AND they are great cartomizers. I am not knocking them one bit at all. Fantastic stuff.
I just like the Greencig ones because I can drip them if I want to so I can try out flavors just like I do with a regular atty, and I can replace the filler if I ever need to, and the build quality just seems a bit nicer. As my wife says though... I'm kind of a tinkering picky .......!
- Hap
- Status
Similar threads
- Locked
