Dripping/testing problem

[lfdm]

So I've got a bunch of flavors all sitting on my desk. Here's my problem. I can't seem to try them out right. I don't really want to buy a cartomizer per flavor to try (I've got something like 20 or so samples form different places.) I've read that a lot of people use the dripping atomizers for trying out new flavors.

But I don't quite get it. Do I have to clean them out after trying this or that? I try something, burn off kinda what's left with some dry burns, and then drip something new on there -- but it always seems off, some mix of what was in there before. Not the greatest way to taste test.

I've seen some cleaning directions, so I guess I'll get 3 or 4 atomizers and just clean them after trying each of 3 or 4 flavors -- but is there an easier way? The cleaning process looks like it's really an overnight kinda thing where you have to let the atomizer dry out afterwards.

 

[kiwivap]

Hiya,
Get a few atomizers. You don't say what pv you are using - if its an Ego you probably want an atty at 2.0 -2.2 ohms, like this:
510 Atomizer - 2.2 ohm (with tip)

With attys, if the flavors are similar you can just change the flavor. You only need to put a few drops in. But they will need cleaning. Rinse them with hot water, then leave them to dry. When dry, do a dry burn.Dry burning is putting on the ego, firing the button for a few seconds, then resting it for a few seconds. You will see a bit of vapor coming out - that's the gunk burning off. When the coil glows red completely you stop.
Here's a video on dry burning an atty:



You can try just adding the next juice - if its a similar kind of flavor. You only put in a few drops each time. I just add the next juice sometimes. But you will need to clean it at some point - either between juices or after a few.

 

[lfdm]

I'm using a provari mini, and an ego twist as backup

 

[kiwivap]

The one I linked would be fine, or this:
510 Bridgeless Atomizer - 2.5 ohm

Any 510 threaded atomizer will do the trick - those are examples that may interest you.

 

[Tiffany Smeggin Peak]

when i taste test, i try to do a couple drops, vape it till it's mostly gone, blow the rest of the juice out on a towel and drip adifferent juice.
The flavors might muddle a bit, but my purpose of taste testing is just to see if they are vapeable.

 

[pkj]

If I am drip testing several juices at a sitting I drip, test, put in a few drops of pg, burn, blow out pg, add next juice I want to test.
Works for me, ymmv.