So I am new to all of this E-cigarette stuff and I just got me a DSE901 today. But every time I try to charge it, the LED on the end of the battery just blinks green and the case has a green light on it and its not holding a charge. I left it in the wall for an hour and i only got like 2 drags off of it before it died. Its brand new it shouldn't be dead yet. Am i doing something wrong? or is there something I am missing?
DSE-901 Charger problems
- Thread starter mikeb315
- Start date
- th_trl_thread_readers 0
- Status
No, no spare battery. The battery is def. dead and it wont take a charge. I plug it in to the wall like I am suppose to with the batter screwed in to the box and the LED on the end of the "cigarette" just blinks green and the case has a green light on it. It should be red on the case and the LED shouldn't even be on. I have scowered the internet and can't find ANYONE who has had anything even close to this issue.
Nope, the battery was def. dead. Everytime I would go to take a drag it would let me smoke for a second then flash green indicating a dead battery.
I think I may have solved it though. I smoked it until the battery was so dead the LED wouldnt come on. Then I plugged it in to the wall and it FINALLY turned red, so I left it overnight and it seems to be good this morning. Hopefully it stays working
Thank you for your advice everyone!
I think I may have solved it though. I smoked it until the battery was so dead the LED wouldnt come on. Then I plugged it in to the wall and it FINALLY turned red, so I left it overnight and it seems to be good this morning. Hopefully it stays working
Thank you for your advice everyone!
sounds like you got a bad battery. It happens more often than you might think. I used to sell cell phones, and would get at least two to three battery returns a month. They are, after all, a semi-enclosed, semi-reversible, electro-chemical reaction...
Heyhey, change a new charger or attery for test. one of them must have dead.......I guess you will have to get a hold of customer support and let them know about your problem. I hope the kit you got is from the US or Hell?
This is a common problem to 801s and 901s in my experience. The batt and the charger aren't communicating.
Sometimes, if it is a manual batt, you can just hit the button on the batt while it is in the charger, the led lights steady and it will then begin to charge.
If that doesn't work, take the batt out of the charger, press the button (or suck on that sucker if auto until the led comes on) then reinsert and charge.
Hope that does it. Of course, as others have suggested, you may just have some bad parts.
Sometimes, if it is a manual batt, you can just hit the button on the batt while it is in the charger, the led lights steady and it will then begin to charge.
If that doesn't work, take the batt out of the charger, press the button (or suck on that sucker if auto until the led comes on) then reinsert and charge.
Hope that does it. Of course, as others have suggested, you may just have some bad parts.
Im having this problem right now too - Im on vacation and the TWO batteries I brought with me, both brand new, are both doing the same thing. I happen to have two chargers, and both chargers do the same thing. Pretty annoying!
CB
CB
I have had this exact problem with a couple of chargers. (and other chinese stuff) They don't know how to solder properly. Pop that case apart and you will probably find one of the wires is not connected properly. They are bad about cold solder joints.
Dap
Dap
- Status
Similar threads
