Are there any plans on stocking the dual coil cartomizers?
I put about 60 drops in mine they hold allot work good they are juice and battery hogs to be expected.
I would say 25 drops is not nearly enough. Although, since the coils are 3ohm, it is not as much of an issue, as say, a 2ohm coil.
I would recommend filling with a syringe. You should be able to get well over 1ml into one of these dual coil bad boys. 1.25ml if I had to guess, while remaining on the safe side.
The ones i have are about as long as a xl ce2 close i put 50-60 drops in to start,then cap off with 20-30.No leaks on the ones i have.Ware did you get yours sound like diff. cartos then mine.Maybe mine are different from the rest. Anything over 25 drops and it over fills it and leaks like crazy. Mine look just like a regular carto but, are a little bigger. And just out of curiosity I just tried to fill one with 1ML, and it gurgled and then leaked out where the carto attaches to the battery first draw.
the madvapes site is stating that these are not recommended for eGo models, but 3.7V mods.
Dual Coil 510 Mega Cartomizer, 5 Pack
strangely, they also say they work well with 5-6V devices, even though they are 1.6Ω actual resistance. to me these things conflict, do not make sense?
1.6Ω should work on an eGO, it's a bit on the low side (will really make the batt work, at least on the 650 size). the 900+ mAh batts you would think, should be fine?
why would the physical configuration make it any different than a "regular" LR atty?
the 5-6V statement baffles me, I'd think even 5V would pop one of these in a heartbeat.