Durable 510 Battery Connector

[VRx]

What is everyone using for their mods.

I built a handful of tekkeon mods and used the standard gold connectors from madvapes and Good Prophets and while I had better luck with one vendor over the other, ultimately they only last for about a year before they can't really hold on to cartomizers anymore.

The way I build them makes it somewhat difficult to change them and now even the new ones don't seem as tight fitting to begin with.

Is there a source for a good quality 510 battery connector from a stronger material that does not wear out so quickly?

 

[Java_Az]

What is everyone using for their mods.

I built a handful of tekkeon mods and used the standard gold connectors from Madvapes and Good Prophets and while I had better luck with one vendor over the other, ultimately they only last for about a year before they can't really hold on to cartomizers anymore.

The way I build them makes it somewhat difficult to change them and now even the new ones don't seem as tight fitting to begin with.

Is there a source for a good quality 510 battery connector from a stronger material that does not wear out so quickly?

These are all that i know ofVape - Shorty 510-510 Extension/Connector with nut Sealed. Stainless Steel with a nut to connect them to the case. If your not using the case as a ground your going to have to use a big wire connector to go behind the nut. Stainless is very hard to solder to so i wouldnt count on that working unless you have a torch and high grade solder. Pretty sure the center pin is not Stainless so that part is solderable

 

[trevor148]

Nice I hate having to solder the negative wire.

 

[VRx]

Thanks for the link.

I was just looking at those but they would be hard to install in my mods. I have very limited space and most likely don't have space for the nut but I might be able to make them work.

I have a few older box mods that have very solid battery connectors but anything I purchased in the last 2 years are made of a much thinner weaker material from what I can see. I have only tried the "gold" connectors, I was just wondering if anybody else sells these that are different than the mainstream gold and silver connectors you can buy pretty much everywhere. I assume not since there is probably not many manufacturing sources.

 

[TomCatt]

Not aware of any other sources for battery connectors. You could make your own: http://www.e-cigarette-forum.com/fo...e-threading-connectors-801-901-510-400-a.html

 

[VRx]

Thanks for that info. It's a bit more than I think I could get into right now. I might give the threaded ones a shot to see if it would work.