eGo-C Twist v/v

Status
Not open for further replies.

sweetgypsea

Senior Member
ECF Veteran
Verified Member
I'm so confused. I opened my new eGo-C Twist starter kit today....no freaking instructions anywhere to be found!

I've figured out (with the help of a friend) how to assemble it and basically use it, but I am confused on how to vary the voltage! Also, the first tank (starter kit came with two) didn't work....couldn't get any vapor from it. Don't know if it was a bad tank or something I did wrong.

Can anyone point me in the direction of some helpful info or actually know anything off hand from personal experience? Note, I am severely hard of hearing and a YouTube video (without closed captioning) would be way too hard for me to understand. Thanks for any info you guys might have. :)

Happy vaping!!!


Sent from my iPhone using Tapatalk
 

sweetgypsea

Senior Member
ECF Veteran
Verified Member
yhude5an.jpg


This is what it looks like. Have no idea what I'm doing lol


Sent from my iPhone using Tapatalk
 

porkchopbun

Super Member
ECF Veteran
Verified Member
Nov 21, 2013
826
424
Northern CALI, USA
1. Make sure your battery is charged, these usually come drained. Connect the top to battery.
2. On the bottom of your e-go device, go head twist it close to 3.7
3. go ahead and blow into it, not take a puff..but mini blow..give a primer puff
4. press/hold the fire button, and take mini puff (inhale),
 

~Sue~Feb2012

Vaping Master
ECF Veteran
Verified Member
Mar 10, 2012
6,071
10,352
USA
Some numbers on the dial on the bottom of the twist style batteries are extremely hard to read! Try turning the dial little by little, starting one way, vape, try it again after turning it again, and so on, until you get the other end of the dial.

I have ego twists and evod twists. Basically, in general, the 3.8 to 4.0 work fine depending on the atty on top. I seem to prefer the 2.0 ohm toppers. Lower resistance toppers can burn quickly and higher than 2.5 ohm don't seem to work very well at all, for me.

Let us know how you're making out with it sweetgypsea:)
 

sweetgypsea

Senior Member
ECF Veteran
Verified Member
Some numbers on the dial on the bottom of the twist style batteries are extremely hard to read! Try turning the dial little by little, starting one way, vape, try it again after turning it again, and so on, until you get the other end of the dial.

I have ego twists and evod twists. Basically, in general, the 3.8 to 4.0 work fine depending on the atty on top. I seem to prefer the 2.0 ohm toppers. Lower resistance toppers can burn quickly and higher than 2.5 ohm don't seem to work very well at all, for me.

Let us know how you're making out with it sweetgypsea:)

Wow I just figured it out (with your help)! Didn't realize the bottom was where I was supposed to twist to vary the voltage. Thanks!

It's possible that your tank is not making a connection to the battery (assuming the battery is not a DOA) ? the tank could be DOA or flooded too.

Do you hear any gurgling or any thing?

No gurgling at all and I can't even inhale from the tip. Feels like there's something "blocking" it or something. I think maybe the tank is DOA, as you suggested.

Battery's charged so I don't think that's the problem.


Sent from my iPhone using Tapatalk
 

sweetgypsea

Senior Member
ECF Veteran
Verified Member
I couldn't tell from the picture, and don't know what "kit" you have....

is the tank all one-piece or can it be disassembled? It might be assembled backwards or something lol

When you filled it, it might be possible that some liquid went down the center post, or, the "wick" inside is blocked:(

It can be disassembled. I actually think I *might* have gotten some juice in the center... :(


Sent from my iPhone using Tapatalk
 
Status
Not open for further replies.

Users who are viewing this thread