eGo CE4 Battery Info Needed

Status
Not open for further replies.
I bought an eGo CE4 starter kit that came with a battery, clearomizer and USB charger. The first thing I did was put the battery in the charger as I have read you should fully charge it and leave it plugged in several additional hours before you use it the first time. Well, what I noticed is that the LED on the charger never changes from Red to Green no matter how long the device is plugged in. So there is no way of knowing when its fully charged. The LED does turn green when the battery is removed, but is always red when one is plugged in (even over night)

I ordered a second battery and the same thing happens. So, it must be a issue with the charger.

The charger does seem to work as both batteries have had the blue LED flash five times and shutdown as they were depleted, and I charge them and they are fine. The thing is I don't know when they are fully charged. Does anyone know (roughly) how long it takes to charge these batteries with the usb port on a laptop?

Has anyone else ever had this problem?

Thanks
 

szot

Ultra Member
ECF Veteran
I suggest U use a wall adapter with that USB cable charger...it will charge much faster..when I use just my puter and USB , I had the same issue as U....now with the wall adapater the charging time will vary from 2 hrs to 14 hours depending on how low, old, and the size of the battery...any B&M shop sells those wall adapters for $5...and here online for $4 USB Wall Socket Charger - 500mah your battery will show GREEN when fully charged..
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread