eGo-T atomizer question

[karryconway]

I recently bought an eGo-T kit....came with 2 atomizers and 2 batteries.....One produces more vapor that the other one. Swapped the batteries so thats not the problem......Is there something i cand do to make the vaporizer produce more?

 

[dotma]

I had so much trouble with the atomizers and tanks, but hopefully somebody will help you!

 

[MadScientistVapor]

So you're saying one atty produces more vapor than the other, right? IME, attys can vary in quality control quite a bit. Did you
blow off all the primer fluid on both and vape for a while 'to break them in'? Sometimes optimal performance is not right when it's brand new. In fact, I've revived an atty and had it work better than a brand new one. Weird. Goes against the laws of physics.

 

[Robnoxious]

90% of the ego-t starter kits come with 5 tanks, 2 batteries, and 2 atomizers. The two atomizers although they look identical, one is a standard atty and the other is a low resistance atty. The LR atty burns hotter which in turn produces more vapor. I use standard attys until i use a juice that dosent perform well enough for my liking, pop the LR on and it improves throat hit, flavor, and vapor. Good luck, happy vaping!!!

 

[Cokeybill]

90% of the ego-t starter kits come with 5 tanks, 2 batteries, and 2 atomizers. The two atomizers although they look identical, one is a standard atty and the other is a low resistance atty. The LR atty burns hotter which in turn produces more vapor. I use standard attys until i use a juice that dosent perform well enough for my liking, pop the LR on and it improves throat hit, flavor, and vapor. Good luck, happy vaping!!!

That isn't true. Only "certain vendors" sell a LR atty and a reg atty in a kit. Most have the reg attys in the kits. Also some sell them in a custom way as to your specifications.

 

[Jeremy-WI]

The LR atties I have that I think are genuine Joye have LR stamped into the battery connector on the threaded end

 

[robcope]

I have never had goodluck with the tanks either. They work, but not great. I find myself pulling one out and giving it a try now and then, but I prefer to drip or use a tank mod with my Inferno (eGo). Maybe some day I will figure it out.

 

[Robnoxious]

Take a look at what you have ordered, if you read the description on the site you ordered it from and one is lr and the other is standard, then your question is answered. If they are both standards or both lr, then you have a faulty atty.

 

[karryconway]

thanks for all the replies.....is there a standard way to clean attys for this model

 

[steve in sc]

If your stuff is new, (like mine), try this: Unscrew the atty from the battery with the tank still installed. Blow through the battery connector end for about 1 second - Not real hard but like you're trying to blow some trash through it. Connect it back to the battery and take a draw. If you get a good vape and TH then you're looking at a wick problem. I'm waiting for my silica rope to come in from McMaster Carr and already have my tea bags ready. I ground a small screwdriver and have learned how to take the tank needle out (that little part inside the tank side of your atty that pierces the tank and allows the wick to draw the juice to the coil in the atty). There are some really good tutorials on building a new wick (mod) that moves more juice to the coil in your atty. Whatever you do, please stay with it and don't turn back to the analog sticks of death!!!

V/R,
steve in sc

 

[MPage]

They now have an Ego C where only the wick part has to be replaced instead of the entire atty.