eleaf istick Pico 2 mod Kit 75W
The Pico has existed since time immemorial, the Pico is most likely one of the most successful devices since electronic cigarettes have existed.
Over the years Pico has been offered in different versions and sizes, just to name a few; Pico 75W, Pico 25 Pico S, Pico 21700, Pico Compaq and Pico Squeeze, so what's new the Pico 2 Mod Kit 75W proposes? Not much to tell, but some details are interesting.
To complete the kit, the 24mm GZeno S Tank was chosen which is an update of a previous Eleaf product, this tank with its GZ coils is aimed at both MTL and RDL vaping.
Enjoy the reading.
The cardboard box with which the kit arrives, bears on the front; the name of the kit, the manufacturer's brand, the image of the kit and some features in the form of an icon.
On the back they are listed; the contents of the package, the specifications, the color of choice (Rose Gold), the addresses of the manufacturer and the service department as well as logos / trademarks required by law.
On the sides of the package we find; the QR-Code, the Scratch & Check and the Eleaf social contacts.
IStick Pico 2 Mod Kit Packing List:
1 * iStick Pico Device 2
1 * GZeno S Tank (4ml / 2ml)
1 * 0.8Ω GZ Coil
1 * 0.4Ω GZ Coil
1 * USB Type-C Cable
1 * 4ml Pyrex Glass
1 * Tool to disassemble the tank
1 * Warranty Card
2 * User Manual
Eleaf iStick Pico 2 Mod parameters:
Brand: Eleaf
Product Name iStick Pico 2 Kit
Kit dimensions: 27.5x50x70.5mm
Mod weight: 123g
Battery: Single 18650 (not included)
Output power: 75W max
Modes: VW, TC-Ni, TC-Ti, TC-Ss, TCR.
Resistance range: 0.05-3.5Ω
Charging current: 5V / 2A
Tank GZeno S parameters:
Measurements: 24x49mm (28mm Bubble Pyrex)
Weight: 60g
Drip Tip: 510 replaceable
AFC: Lower adjustable
Liquid Capacity: 4ml (TPD 2ml)
Filling hole diameter: 3.5mm
GZ Coil: 0.4Ω (20-35W), 0.8Ω (12-18W), 1.2Ω (7-13W)
GZ Coil Material: Kanthal
Tank material: Pyrex glass with stainless steel
Refill type: Top fill
Available colours:
Rose Gold, Matte Gunmetal, Silver.
Eleaf iStick Pico 2 Mod Kit 75W first impressions:
The newcomer is completely covered in metal just like the glorious Pico 75 was. Decorations have been added on the panels that you may like or not, I find them pleasant to the touch and useful for a better grip of the hand.
The dimensions in height (cap) are the same as the Pico 75 while the body of the Pico 2 is even lower than the very small progenitor.
In order to accommodate larger atomizers on the new Pico 2, Eleaf has opted for a factor form that widens towards the front, the handle (narrow side) has remained unchanged, handling remains very good.
Eleaf iStick Pico 2 Kit is supplied with the new 24mm GZeno S Tank, GZeno Tank with its multi adjustable AFC is suitable for both MTL and RDL and this is a novelty because previously on the various versions of the Pico were combined lung tanks ( Melo or Ello) which were at most suitable for an RDL vape.
The side view of the iStick Pico 2 Mod Kit highlights the decorations on the panels and their recess towards the front which compensates for the widening of the top and base.
The battery cap has been lengthened to allow the lowering of the body compared to the old pico 75, in this way the dimensions in height remain contained even with atomizers that are not exactly small like the new GZeno Tank.
The Pico has existed since time immemorial, the Pico is most likely one of the most successful devices since electronic cigarettes have existed.
Over the years Pico has been offered in different versions and sizes, just to name a few; Pico 75W, Pico 25 Pico S, Pico 21700, Pico Compaq and Pico Squeeze, so what's new the Pico 2 Mod Kit 75W proposes? Not much to tell, but some details are interesting.
To complete the kit, the 24mm GZeno S Tank was chosen which is an update of a previous Eleaf product, this tank with its GZ coils is aimed at both MTL and RDL vaping.
Enjoy the reading.
The cardboard box with which the kit arrives, bears on the front; the name of the kit, the manufacturer's brand, the image of the kit and some features in the form of an icon.
On the back they are listed; the contents of the package, the specifications, the color of choice (Rose Gold), the addresses of the manufacturer and the service department as well as logos / trademarks required by law.
On the sides of the package we find; the QR-Code, the Scratch & Check and the Eleaf social contacts.
IStick Pico 2 Mod Kit Packing List:
1 * iStick Pico Device 2
1 * GZeno S Tank (4ml / 2ml)
1 * 0.8Ω GZ Coil
1 * 0.4Ω GZ Coil
1 * USB Type-C Cable
1 * 4ml Pyrex Glass
1 * Tool to disassemble the tank
1 * Warranty Card
2 * User Manual
Eleaf iStick Pico 2 Mod parameters:
Brand: Eleaf
Product Name iStick Pico 2 Kit
Kit dimensions: 27.5x50x70.5mm
Mod weight: 123g
Battery: Single 18650 (not included)
Output power: 75W max
Modes: VW, TC-Ni, TC-Ti, TC-Ss, TCR.
Resistance range: 0.05-3.5Ω
Charging current: 5V / 2A
Tank GZeno S parameters:
Measurements: 24x49mm (28mm Bubble Pyrex)
Weight: 60g
Drip Tip: 510 replaceable
AFC: Lower adjustable
Liquid Capacity: 4ml (TPD 2ml)
Filling hole diameter: 3.5mm
GZ Coil: 0.4Ω (20-35W), 0.8Ω (12-18W), 1.2Ω (7-13W)
GZ Coil Material: Kanthal
Tank material: Pyrex glass with stainless steel
Refill type: Top fill
Available colours:
Rose Gold, Matte Gunmetal, Silver.
Eleaf iStick Pico 2 Mod Kit 75W first impressions:
The newcomer is completely covered in metal just like the glorious Pico 75 was. Decorations have been added on the panels that you may like or not, I find them pleasant to the touch and useful for a better grip of the hand.
The dimensions in height (cap) are the same as the Pico 75 while the body of the Pico 2 is even lower than the very small progenitor.
In order to accommodate larger atomizers on the new Pico 2, Eleaf has opted for a factor form that widens towards the front, the handle (narrow side) has remained unchanged, handling remains very good.
Eleaf iStick Pico 2 Kit is supplied with the new 24mm GZeno S Tank, GZeno Tank with its multi adjustable AFC is suitable for both MTL and RDL and this is a novelty because previously on the various versions of the Pico were combined lung tanks ( Melo or Ello) which were at most suitable for an RDL vape.
The side view of the iStick Pico 2 Mod Kit highlights the decorations on the panels and their recess towards the front which compensates for the widening of the top and base.
The battery cap has been lengthened to allow the lowering of the body compared to the old pico 75, in this way the dimensions in height remain contained even with atomizers that are not exactly small like the new GZeno Tank.