Eleaf iStick PICO 75w and coil problem

[t20 vapor]

Hi! i bought an eleaf iStick PICO 75w, with an ECLM 0,75 coil. The problem is, when i insert the coil , i dont see any cotton arround the coil. Its like the sides are sealed. Compared to the other coils, where the cotton is visible.

And when i put juice and wait 10 min , and put the wat on 15, i cant feel the taste. it just generate cloude. what can be the problem? i would apreciate i help. i had t20 vapor before.

 

[Baditude]

I'm not familiar with the ECLM coil, but there is cotton in the coil head beneath that mesh like covering There should be slits or holes on the sides of the coil head which allow liquid to get to the cotton when in the tank.

Make certain that you are thoroughly "priming" the coil head before you install it into the tank, and prior to filling the tank. The most common user error that novices make is not priming the coil adequately.

 

[DeloresRose]

Mine just arrived a couple days ago, and I haven’t filled it yet.

But I did look to see what kind of coil, and it’s a lot like Aspire coils, which I’ve used many of.

Agree with Baditude, watch that video. I like to leave them soak as long as I can, an hour, overnight. Then lower my watts and take some very gentle hits until I can taste the juice. If you prime and break in, they should last quite a while.

 

[t20 vapor]

Mine just arrived a couple days ago, and I haven’t filled it yet.

But I did look to see what kind of coil, and it’s a lot like Aspire coils, which I’ve used many of.

Agree with Baditude, watch that video. I like to leave them soak as long as I can, an hour, overnight. Then lower my watts and take some very gentle hits until I can taste the juice. If you prime and break in, they should last quite a while.

Hello. Everything works fine. i used a new coil, following the steps and video , and left it over for a night. now it works good. thanks for all the help

btw i do have one more question , when i vape , i feel the taste very much , but it generate much cloud to , and the cloud is cold. Is there anyway to make it hotter and reduce the cloud? istick picko 75 W ECLM 0,75 is at 20 w right now.

 

[t20 vapor]

I'm not familiar with the ECLM coil, but there is cotton in the coil head beneath that mesh like covering There should be slits or holes on the sides of the coil head which allow liquid to get to the cotton when in the tank.

Make certain that you are thoroughly "priming" the coil head before you install it into the tank, and prior to filling the tank. The most common user error that novices make is not priming the coil adequately.

Hello. Everything works fine. i used a new coil, following the steps and video , and left it over for a night. now it works good. thanks for all the help

btw i do have one more question , when i vape , i feel the taste very much , but it generate much cloud to , and the cloud is cold. Is there anyway to make it hotter and reduce the cloud? istick picko 75 W ECLM 0,75 is at 20 w right now.

I'm not familiar with the ECLM coil, but there is cotton in the coil head beneath that mesh like covering There should be slits or holes on the sides of the coil head which allow liquid to get to the cotton when in the tank.

Make certain that you are thoroughly "priming" the coil head before you install it into the tank, and prior to filling the tank. The most common user error that novices make is not priming the coil adequately.

Hello. Everything works fine. i used a new coil, following the steps and video , and left it over for a night. now it works good. thanks for all the help

btw i do have one more question , when i vape , i feel the taste very much , but it generate much cloud to , and the cloud is cold. Is there anyway to make it hotter and reduce the cloud? istick picko 75 W ECLM 0,75 is at 20 w right now.

 

[Baditude]

btw i do have one more question , when i vape , i feel the taste very much , but it generate much cloud to , and the cloud is cold. Is there anyway to make it hotter and reduce the cloud? istick picko 75 W ECLM 0,75 is at 20 w right now.

Generally, increasing the wattage setting will make it hotter, but it will also increase the vapor cloud.

Vg (vegetable glycerin) is responsible for producing the vapor. Pg (propylene glycol) is the flavor carrier and adds a little throat hit. To reduce vapor, use a higher Pg lower Vg e-liquid.

 

[t20 vapor]

Generally, increasing the wattage setting will make it hotter, but it will also increase the vapor cloud.

Vg (vegetable glycerin) is responsible for producing the vapor. Pg (propylene glycol) is the flavor carrier and adds a little throat hit. To reduce vapor, use a higher Pg lower Vg e-liquid.

Ahaa becuse i have 50% vg and 50%pg. could that be the answer? thanks for help sir

 

[t20 vapor]

Generally, increasing the wattage setting will make it hotter, but it will also increase the vapor cloud.

Vg (vegetable glycerin) is responsible for producing the vapor. Pg (propylene glycol) is the flavor carrier and adds a little throat hit. To reduce vapor, use a higher Pg lower Vg e-liquid.

Hehe i have one more question, last question, i notice that a full tank goes away very fast. is it becuse of the wattage im using or what is it? i know if vaping everytime makes it reduce , but i read that it got something to do with watt?

 

[Baditude]

Hehe i have one more question, last question, i notice that a full tank goes away very fast. is it becuse of the wattage im using or what is it? i know if vaping everytime makes it reduce , but i read that it got something to do with watt?

The more frequently you vape, the faster you juice disappears. The higher the wattage, the more vapor you make, the faster your e-liquid and battery power is consumed. The lower the resistance (ohms), the more vapor you produce, the more battery power you consume.