I have two 30 ml eliquid bottles that do this now, but something about the top of the bottle won't allow for it to close all the way. I just keep turning and turning and it acts like a stripped screw. Any fixes for this?
Eliquid bottle won't close right
- Thread starter Nonexistentman
- Start date
- th_trl_thread_readers 0
- Status
I always just take a dropper or a cap from another bottle of the same sizes (10,15, and 30) from my emptys or even rinse an empty and transfer the juice
I thought about doing that but I already filled up my empties with liquid from my bottles that have no drippers at all /:
Play around with it and you should be able to get the threading right. You just have to start twisting it on from the right spot. When it goes wromg it usually is just mis-thread and going on at the wrong angle
Tried every angle and nothing works. It goes on perfectly and then further down the threads it tilts and pops off again
You may have stripped the threading. Your best bet is to just order a bunch of extra bottles. That way you can pour any bad bottles into another. I always have a stock of ten or so bottles,then if a juice comes without a dropper or in a bottle type I don't like I can swap it.
- Status
Similar threads
