The costs of running this huge site are paid for by ads. Please consider registering and becoming a Supporting Member for an ad-free experience. Thanks, ECF team.

Emergency puromizer revival

Discussion in 'JantyWorld' started by vedmaka, May 5, 2012.

Thread Status:
Not open for further replies.
Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. vedmaka

    vedmaka Full Member

    Apr 8, 2012
    One day my first puro from NEO Classic kit become very tight to vape and produce less vapor.
    I took it apart and accidentally broke wires and coil soldering :(

    * To get puros inner from metal case i used battery from 510-T, screwed it into puro and pulling while make side to side movements.

    How i brought it back to life:

    Sadly i cant do photos, so i tried to make image


    1. Remove all wires, coil and wicks out of ceramic bowl (unsolder if needed) .
    2. Make new wick with coil.
    3. Take 2 low-resistance wires: one short and one long.
    4. Make twist coil "legs" and wires.
    5. Put this construction into ceramic bowl from upper side ( wires into holes in ceramic bowl ).
    6. Fix short (+) wire on central metal tube by silicone thing under ceramic bowl [A].
    7. Fix long wire (ground) on bottom golden circle [C] of puro by bottom silicone ring .
    8. Check if there is no short circuit!
    9. Screw battery and check coil is heating.

    Place this back into plastic tube, put metal case back.

    Done :)
Thread Status:
Not open for further replies.

Share This Page