The costs of running this huge site are paid for by ads. Please consider registering and becoming a Supporting Member for an ad-free experience. Thanks, ECF team.

EOBS Engine 100W Kit | Steam Crave Hadron Pro DNA250C Combo Kit | Suorin Air Mod Pod Kit

Discussion in 'Sourcemore' started by Ema, May 25, 2021.

Thread Status:
Not open for further replies.
Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. Ema

    Ema Forum Supplier ECF Veteran

    Sep 7, 2015
    OBS Engine 100W Kit

    Engine Kit is the first vaping device that can replace battery sleeve. It supports single 18650/20700/21700 battery to get a max output of 100W. With 2A Type-C fast charging, it features longer endurance and easier recharging. Paired with a Engine S Tank having 6ml e-juice capacity, it is equipped with the latest E Mesh Series Coil to bring you fresh, smooth and rich cloud experience. Besides, Engine S Tank features a airflow control system and a 0.96 inch LED screen to display the vaping details.


    Details:

    1. The first vaping device that can replace the battery sleeve
    2. Single 18650/20700/21700 battery to reach 100W max output
    3. 2A type-c fast charging
    4. With Engine S Tank
    5. New E series mesh coil
    6. 0.96 inch LED screen



    [​IMG]



    Steam Crave Hadron Pro DNA250C Combo Kit

    Hadron Pro DNA250C Combo Kit is combined with Hadron Pro DNA250C Mod and Ragnar RDTA. Steam Crave Hadron Pro DNA250C Box Mod is powered by a changeable Li-Po 1600mAh battery, it fires to a 400W maximum output with an industry leading power efficiency rating. Steam Crave Hadron Pro Box Mod adopts the advanced Steam Crave DNA250C chipset. It supports Replay/Boost/VW/TC modes. The Mod is charged via USB 3A charging (2A Suggested). The high discharge battery can provide low profile, low chance of leaking electrolyte, low internal resistance, long cycle life and safety guarantee. Its 0.9" full color TFT screen shows vaping data clearly, brings you more convenience. The Aromamizer Ragnar RDTA can hold 18/25ml e-juice capacity (Replacement Glass is included). It can produce 80% side airflow, 20% bottom airflow and will provide smooth airflow for medium and high power vaping. Steam Crave Aromamizer Ragnar RDTA adopts postless deck with bottom honeycomb air holes for wonderful vaping experience.


    Details:

    1. Changeable Built-in battery, Li-Po 1600mAh 4s
    2. DNA250C Chipset: Replay/Boost/VW/TC modes
    3. Maximum output 400W
    4. 0.9" full color TFT screen
    5. 22mm wide bore 810 drip tip
    6. Postless deck with bottom honeycomb air holes
    7. 80% side airflow and 20% bottom airflow
    8. Smooth airflow for medium and high power vaping
    9. Multiple protections: Atomizer/Low Resistance/Short Circuit/Overheat/Low Voltage Step Down/Onboard Reverse Polarity Protection


    [​IMG]




    Suorin Air Mod Pod Kit

    Air Mod Kit is designed with extra sustainability and practicality to breathtaking performance. Air Mod is constructed with solid zinc alloy on the one side, translucent and lightweight PCTG cover on the other side, which displays futuristic aesthetics and the technology of tomorrow. It contains 1500mAh battery within a sleek body, features upgraded type-c port to provide faster charging. With the advantage of Z-shape blowhole design and upgraded atomization technology, it can level up the heating areas and heating speed while keeping a relative low temperature of the device. The 0.6ohm/0.8ohm mesh coil included in the package will bring a true smooth flavor and most satisfying throat hit for you. The advanced conditioning mechanism hepls you choose the desired air inlet easily. There are 3 original aeration holes on the interface to provide you a most flavorful vaping enjoyment. In addition, it can detect the coil's resistance to the according wattage. Air Mod has a longer service lifespan with a lower environmental impact tanks to the use of recycled parts and conflict-free materials. The pod's capacity is 3ml.


    Details:

    1. Ingeniously framed in solid zinc alloy on the one side
    2. Translucent and lightweight PCTG cover on the other side
    3. A sleek body with 1500mAh battery
    4. Upgraded type-c fast charging
    5. Refined heating dynamics, 0.96 inch TFT display
    6. 0.6/0.8ohm sub ohm mesh coil to meet your different needs
    7. Advanced conditioning mechanism
    8. 3 original aeration holes to increase aerodynamic efficiency and channel air for cooling
    9. Automatically detects coil's resistance to the according wattage
    10. Made with recycled parts and from conflict-free materials


    [​IMG]
     
Thread Status:
Not open for further replies.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice